UGEARS DIY3D Military Truck Instruction Manual
- May 15, 2024
- UGEARS
Table of Contents
Military Truck
Instruction Manual
DIY3D Military Truck
Mechanical models
Assembly instructions:
Remove model parts from the hanger board as illustrated below. Careful not to break parts. If a part does not remove easily, carefully cut it out with a knife. This model is intended for self-assembly without glue. If you have difficulty installing the axles, try waxing them with a regular candie. All moving parts can also be waxed during assembly to reduce friction when operating the model.
Customer support
customerservice@ugearsmodels.com
Warning
Do not use a lighted candle!
Symbols.
Pay attention. Check for correct orientation or positioning.
Wax the part with a regular candle (rub with a candle).
The part should be easily rotated (moved).
Specified details come with spare duplicates.
This is not a structural component; it is a tool for measurement and assembly.
It’s easier to pull out some parts with the «helper (H)».
| 
---|---
| 
| 
| 
| 
| 
| 
ugearsmodels.com
Customer support
customerservice@ugearsmodels.com
Thanks for following along on this journey with us.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>