UGEARS 119 Hot Rod Furious Mouse Instruction Manual
- June 10, 2024
- UGEARS
Table of Contents
UGEARS 119 Hot Rod Furious Mouse
Assembly instructions:
Remove model parts from the hanger board as illustrated below. Careful not to
break parts. If a part does not remove easily, carefully cut it out with a
knife. This model is intended for self-assembly without glue. If you have
difficulty installing the axles, try waxing them with a regular candle. All
moving parts can also be waxed during assembly to reduce friction when
operating the model.
Warning
- Do not use a lighted candle!
SYMBOLS
- Wax the part with a regular candle (rub with a candle).
- Sand to remove burrs
- Pay attention. Check position of the part
- Check the mechanism for smoothness and accuracy of movement. Operate the mechanism so the parts would seat-in.
- Specified details come with spare duplicates.
- This is not a structural component; it is a tool for measurement and assembly.
INSTALLATION INSTRUCTION
Thanks for following along on this journey with us.
Customer support
[email protected]
ugearsmodels.com
Read User Manual Online (PDF format)
Loading......