UGEARS Stagecoach 3D Mechanical Educational Wooden Puzzles Instruction Manual
- June 15, 2024
- UGEARS
Table of Contents
Model «Stagecoach»
Stagecoach 3D Mechanical Educational Wooden Puzzles
Assemble Me. Convey Me https://ugearsmodels.com/stagecoach.html
Assembly instructions
Mechanical models
Assembly instructions:
Remove model parts from the hanger board as illustrated below. Careful not to
break parts. If a part does not remove easily, carefully cut it out with a
knife. This model is intended for self-assembly without glue. If you have
difficulty installing the axles, try waxing them with a regular candle. All
moving parts can also be waxed during assembly to reduce friction when
operating the model.
Warning!
Do not use a lighted candle!
Symbols.
| Wax the part with a regular candle (rub with a candle).
---|---
| Pay attention. Check for correct orientation or positioning.
| Press the parts as far as they will go.
| The part should be easily rotated (moved).
| Perform the same steps in mirror image.
| Sand to remove burrs.
| Break off or cut.
Spare parts.
This is not a structural component; it s a tool for measurement and assembly.
https://ugearsmodels.com/qr/stagecoach.html?utm_source=scan&utm_medium=stagecoach&utm_campaign=qr
Thanks for following along on this journey with us.
Customer support
customerservice@ugearsmodels.com
ugearsmodels.com