LIFE SKY B0C3VR1N2B Glass Drafting Table Art Desk Instruction Manual
- May 15, 2024
- LIFE SKY
Table of Contents
LIFE SKY B0C3VR1N2B Glass Drafting Table Art Desk
Carefully unpack & identify each component before attempting to assemble. Refer to the parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts, or information on other products, please visit the manufacturer’s website or call or write to us.
Assembly Precautions
Before assembly, carefully unpack and identify each component, referring to the parts list. It is important to assemble on a clean, soft surface to avoid damage. For assistance with assembly, parts, or information on other products, contact the manufacturer.
Maintenance and Safety
- Periodically check screws, nuts, and bolts (every 6 months) and tighten if necessary.
- Do not use power tools for assembly to avoid damage.
- Two people are required for safe lifting during assembly.
Tool Required
A screwdriver is required for the assembly process.
Assembly Instructions Overview
Attention: Do not tighten the screws until you have completed setup assembly. The instructions include a step-by-step guide with detailed diagrams for each stage of the assembly process.
Fusion Craft Station with 24″ Tray
Illustrations show the sequential assembly of the drafting table, including attaching legs, trays, and the tabletop. Each step is accompanied by a diagram with parts clearly labeled and indicated where to attach or secure them.
Stool Assembly Instructions
The stool assembly includes attaching the seat to the legs and securing the support rings. Diagrams provide a clear visual guide for each step.
Specifications
| Part | Description | Quantity |
|---|---|---|
| 1 – 24 | Various components including tabletops, legs, trays, and frames |
Varies
A – M| Different types of screws and bolts| Varies
a – d| Stool components including the seat, legs, and support rings| Varies
FAQ
- Q: Can I use power tools to assemble the drafting table and stool?
- A: No, using power tools is not recommended as it may cause damage.
- Q: What should I do if I’m missing a part?
- A: Contact the manufacturer for assistance with missing parts.
- Q: How often should I check the assembly for loose components?
- A: Check and tighten screws, nuts, and bolts every 6 months.
- Q: Is it necessary to have another person to help with the assembly?
- A: Yes, it is advised to use two people for lifting during assembly for safety.