iDOO I-C-021 Large King Size Air Bed User Manual
- June 16, 2024
- iDOO
Table of Contents
User Manual
Air Mattress with Headboard
Make Guests Feel at Home
Model: 1-C-021
I-C-021 Large King Size Air Bed
Product Size
Thank you for purchasing iDOO Air Mattress with Headboard. To ensure safety and avoid any property damage, please read this manual carefully and use it as indicated. Failure to comply with the instructions and warnings provided herein may result in damage to the product itself. Save this manual for future reference.
Attention: PVC Material
The PVC Material will naturally stretch and expand during use. After being
inflated and/or having been slept on for several days, the air mattress may
lose some of its initial firmness due to the PVC expanding. This is normal and
is not the result of air leak. Add air to the mattress to regain your desire
firmness level using the built-in air pump.
Warning: Risk of Suffocation
- Infants have suffocated on inflatable mattress. Never place an infant 15 months or younger on an inflatable mattress.
- When used by children over 15 months, provide at least a shoulder-width space between mattress and walls, dressers, or vertical objects to avoid entrapment.
- Always keep mattress fully inflated when in use.
WARNING
To reduce the risk of burns, fire, electric shock or injury.
-
Always unplug the air mattress when not in use.
-
Close supervision is necessary when this furnishing is used by, or near children, or people with limited mobility.
-
This air mattress is only to be used for its intended use as described in this manual.
-
DO NOT operate this device if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it is wet.
-
Keep the power cord away from heated surfaces.
-
DO NOT block the air openings while the device is in operation.
-
Always keep air openings free of lint, hair, and other small objects. Never drop or insert objects into any of the openings.
-
DO NOT use the air mattress outdoors or in damp areas, this product is for household use only.
-
DO NOT operate this device where aerosol {spray) products are being used or where oxygen is being administered.
-
DO NOT use the air mattress to support video equipment such as televisions or computer monitors.
-
DO NOT use near people using or wearing medical devices.
-
Keep away from sharp objects that may damage the product. Do not operate with any sharp tools or gadgets around when the mattress is being used.
-
Infants have suffocated on inflatable mattresses. Never place infants aged birth to 15 months to sleep on this inflatable air mattress. Infants can suffocate on an underinflated or deflated mattress, on bedding, by co-sleeping with another person, and by entrap ment between the mattress and bed frame or between the mattress and a vertical surface.
-
Children can be entrapped between the inflatable mattress and an adjacent vertical surface. Provide at least a shoulder width space between the inflatable mattress and adjacent vertical surfaces such as walls, dressers, or other objects.
-
Always keep the inflatable mattress fully inflated when in use.
-
DO NOT open the air pump casing for any reason.
-
DO NOT use on surfaces where heat may cause a problem.
-
A fire may occur if this device touches or is covered by flammable materials including curtains, draperies, cardboard, plastics etc., while in operation.
-
DO NOT operate the pump in enclosed spaces that are not well-ventilated.
Always ensure there is at least 61cm (2ft) of clearance from any wall or object while the pump is in operation. -
DO NOT operate the pump in the presence of explosive and/or flammable fumes.
-
DO NOT place any part of the pump or cord in or under water or other liquid.
-
DO NOT exceed the weight limit for this device: 295kg (650Ib).
CAUTION: This device is operated with an electrical air pump that is
thermally protected.
The pump does not contain parts that can be repaired or serviced. Opening the
pump casing may expose to the risk of electric shock. If you have any issues
with the electrical pump upon arrival, please contact our helpful customer
service team immediately.
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If it still does not fit, contact a qualified
electrician. Do not attempt to bypass this safety feature.
Note: Drawings for illustration purposes only. It may not reflect the
actual product. Not to scale.
Using the Product
-
What’s in the box
1 x Air Mattress with Headboard
2 x Patches
1 x Carry Bag
1 x User Manual -
Product Introduction
1. Air Mattress
2. Headboard
3. Power Cord
4. Power Cord Compartment
5. Control Dial
6. Manual Inflation/Deflation Valve
-
Specification
Model| I-C-021
---|---
Mattress Dimensions| 216+152+46cm/85+60+18inch
Headboard Height| 38cm/15inch
Max Weight Capacity| 295kg/650Ibs
Input| AC 110V-120V 60Hz 1.1A (US/CA)
AC 220V-240V 50/60Hz 130W (AU/UK/EU)
Materials| PVC + Flocking -
Operation
Note:
1. Make sure the floor is clean before unfolding it.
2. Keep it away from the sharp objects that may damage the air mattress.
Before You Start
1. Remove the air mattress from its packaging and unfold it to make the felt side face up.
2. Open the power cord compartment and plug the power cord in an electrical outlet.
3. Push the valve inside tightly, in case of leaking from valve.
Inflate
1. Turn the control dial clockwise to “INFLATE” the air mattress.
2.
Turn the control dial back to “OFF” when the mattress has reached the desired
firmness.
Make sure the control dial is aligned with the “OFF” arrow.
3. Lie
on the air mattress to test the firmness.
4. Adjust the firmness by either continuing to inflate the air mattress or turn the control dial to “DEFLATE” to let some air out.
5. Unplug the power cord and store it in the power cord compartment.
Note: Do not run the pump for over 5 minutes. Allow the pump to cool down for 5 minutes between continuous use.
Deflate/Storage
1. Plug in the power cord and turn the control dial counterclockwise to “DEFLATE” the air mattress.
2.
Allow the air mattress to completely deflate. Unplug the power cord and place
it back into the storage compartment.
3. Lay mattress felt-side up and fold the mattress into thirds, then roll up the mattress to release any remaining air. -
Folding Instructions
1. Ensure the mattress is flat and fully deflated with headboard folded onto the mattress before folding it.
2. Fold the mattress as instructions below.
Manual Inflation/Deflation
Manual Inflation
-
Open the cover of the valve and the upper layer would be revealed (seen in Fig.1). Connect an air pump or hose (purchased by yourself) to the mattress.
Ensure inflate/deflate valve is in the “OFF ” position and insert the portable pump into the 3). -
After blowing up to 80%, quickly cover the® by pushing into the 2.
-
Blow into the air mattress using the (2 until filled with air.
-
After blowing up to 100% or your desired firmness level, close the upper cap (D.
Manual Deflation
To deflate the mattress, fully open the cover of the manual
inflation/deflation valve to release all of the air from the mattress and
close the cover.
How to Locate the Leak?
In rare cases in which there is a leak requiring repair, you must find the source of the leak first. There are 3 ways to find out the source of the leak. Before inspect ing the source of the leak, make sure the mattress is fully inflated and check the valve area first to see If the valve causes the leaking.
METHOD 1: Locate the leak by listening.
Place your ear 5-7cm/2-3in away from the mattress. Press upon the air mattress
which is fully inflated until you find the source of the hissing sound.
METHOD 2: Locate the leak with your wet hands.
Move the wet palm slowly around the surface of the air mattress. Feel the
escap ing air brush “against” your hand.
METHOD 3: Locate the air leak by using soap bubbles.
Add a little liquid dish soap to a spray bottle of warm water. Mix thoroughly
to ensure that you can get an even amount of soap across the whole mattress.
Spray or wipe around the valve first. Escaping air will cause bubbles to form
on the surface.
Tips: Spray the surface of the mattress systematically. Start with the
seams, followed by the rest of the fabric. The leak will reveal itself with
soap bubbles. Don’t worry about getting soap on the mattress.
This can be wiped off later and the mattress will dry.
Mark the leak with a permanent marker once you locate it.
How to Repair
| STEP 1
Completely deflate the mattress before you can use any kind of adhesive patch
to repair your mattress, it must be 100% dry.
---|---
| STEP 2
Clean and dry the area around your leak. Gently press the center with your
thumb to push out any wrinkles, then press down on the patch.
| STEP 3
Place a heavy object on top of the patch and check if it’s fixed in 2-4 hours.
- When opening the package, there may be an odor from the product due to its PVC material. Please keep it in a ventilated place and the odor will dissipate soon after.
- When inflating the air mattress for the first time, it is better to let the mattress to rest for 8-12 hours so that the seams can buffer.
- It is normal for the air mattress to lose a small amount of air after you fully inflate it.
- If you are using the air mattress for more than one night, supplement the mattress each day with 10-15 seconds of air to maintain its firmness.
- Always make sure the control dial is in the “OFF” position after inflating. It is not recommended to run the air pump for longer than 5 minutes.
- After 5 minutes of continuous use, because the air pump will start to generate heat, when it does, allow the air pump to cool down for 30 minutes before resuming use.
Cleaning and Maintaining
- Fold the air mattress loosely and avoid sharp bends, corners, and creases which can damage the product.
- Make sure the mattress is clean and dry.
- Store the mattress in a cool, dry place.
- Use soapy water to clean the surface of the airbed. Don’t use any chemicals.
- No air pump maintenance is required.
- To repair punctures to the air mattress, use only common PVC repair glue and patches.
- Don’t use flammable aerosols on the surface of the air mattress.
Warranty (1-Year Period)
The manufacturer’s warranty is void under the following circumstances but not limited to:
- Improper or inadequate maintenance or modification.
- Accident, misuse, abuse, contamination, or other external causes.
- The use of unspecified adapter and accessories.
- Loss or damage in transit.
- Damages that occurs as a result of one’s failure to follow the instructions.
- This warranty does not apply to expendable or consumable parts and does not extend to any product from which the serial number has been removed.
Customer Service
We have an award-winning warranty, exchange, and customer service team that guarantees hassle-free solutions to any issue you might have within 24 hours.
Tel: +1(951)751-2590 (US ONLY)
Monday-Friday 9:O0AM-4:30PM
1800 69 7367 (AU ONLY)
Monday-Friday 9:O0AM-6:00PM (AEST)
+44(0)7434 666088 (UK ONLY)
Monday-Friday 9:00AM-5:00PM (GMT)
Email: [email protected]
For defective products or the return of items, please contact us with your order number within the specified warranty period. DO NOT dispose of any product parts as they may be required for inspection/repair.
Notice:
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
US Importer: JOICOM CORPORATION
14129 The Merge Street, Building 3 Unit A, Eastvale, CA 92880
Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd.
Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong Cooperation
Zone,
Shenzhen, P.R.China
EU Importer: Renpho GMBH
Lehmweg 17, 20251 Hamburg Hoheluft-Ost, Deutschland, Germany
C &E Connection E-commerce (DE) GmbH
Zurn Linnegraben 20, 65933, Frankfurt am Main, Germany
Email: [email protected]
Richers & Vision Ltd.
Unit 58B, Bordon Enterprise Park, Budds Lane,
Bordon, Hampshire, GU35 0JE, U.K.
Made in China
Documents / Resources
| iDOO
I-C-021 Large King Size Air
Bed
[pdf] User Manual
I-C-021 Large King Size Air Bed, I-C-021, Large King Size Air Bed, King Size
Air Bed, Size Air Bed, Air Bed
---|---