motobilt MB1084 Spare Tire Carrier for Jeep Instruction Manual
- May 15, 2024
- MOTOBILT
Table of Contents
motobilt MB1084 Spare Tire Carrier for Jeep
Specifications
- Part No: MB1084
- Description: JK Tire Carrier Assembly
- Material: Not specified
- Sheet No: 1 of 1
- Revision No: 0
Product Usage Instructions
Installation Steps
- Remove the factory tailgate catch before proceeding.
- Identify the parts using the provided list and quantities.
- Attach the hinge pivot bracket using the stock bolts at 8 locations.
- Attach the hinge pivot nut to the designated locations on the JK Tire Carrier Body, Height Bracket, and Mount Bracket.
- Secure the assembly with the specified SHCS M8x1.25 x 80 lg bolts.
- Ensure proper alignment and tighten all bolts securely.
PARTS LIST
FAQ
- Q: How many locations are there for the hinge pivot bracket?
- A: The hinge pivot bracket should be attached at 8 locations using the stock bolts.
- Q: What should be done with the factory tailgate catch?
- A: The factory tailgate catch must be removed before installing the JK Tire Carrier Assembly.
- Dwg/Part No: MB1084
- Description: JK Tire Carrier Assembly
- Sheet No: 1 of 1
- Rev No : 0
THIS DOCUMENT & THE INFORMATION CONTAINED WITHIN IS THE SOLE PROPERTY OF MOTOBILT INC. THIS DOCUMENT SHALL NOT BE COPIED, STORED, DUPLICATED, REVERSE ENGINEERED or OTHERWISE WITHOUT THE EXPRESS WRITTEN CONSTENT OF MOTOBILT INC.COPYRIGHT © MOTOBILT INC. COPYRIGHTED MATERIAL IS PROTECTED BY INTERNATIONAL COPYRIGHT LAWS. “MOTOBILT” IS A REGISTERED TRADE NAME.
References
Read User Manual Online (PDF format)
Loading......