MOTOBILT MB1215 Motobed Front Molle Panel Instruction Manual
- June 12, 2024
- MOTOBILT
Table of Contents
MOTOBILT MB1215 Motobed Front Molle Panel
MB1215 Motobed Front Molle Panel
- Product Information: Product Name: Motobed Front MOLLE Panel
- ModelNumber: MB1215
- Manufacturer: Motobilt
- Contact Number: 334-219-2333
Product Usage Instructions
Step 1: Assembly 1. Gather the following components: – MB1215-01 (Motobed
Front MOLLE Panel) – MB1215-02 (Qty 2) – 5/16-18 x 1 Hex Bolt (Qty 4) – 5/16
Plain Washer (Qty 8) – 5/16-18 Nylon Insert Hex Locknut (Qty 4) Start by
attaching the MB1215-02 to the MB1215-01 using the provided 5/16-18 x 1 Hex
Bolts. Place a 5/16 Plain Washer on each bolt before securing them. Next,
place a 5/16 Plain Washer on each end of the previously attached bolts. Then,
insert a 5/16-18 x 1 Hex Bolt through each washer. Place another 5/16 Plain
Washer on each new bolt and secure them in place with a 5/16-18 Nylon Insert
Hex Locknut. Repeat steps 2-4 for the remaining two MB1215-02 components.
Ensure all bolts are tightened securely. For any further assistance or
inquiries, please contact Motobilt at the provided contact number.
Note: This is a simplified interpretation of the given text. Please refer
to the actual user manual for accurate and detailed instructions.
Contents
Step 01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>