FUQIDO 6627 COLAMY Big and Tall Gaming Chair 400lbs Racing Style Computer Gamer Chair User Manual

FUQIDO 6627 COLAMY Big and Tall Gaming Chair 400lbs Racing Style Computer Gamer Chair

WARNING

 Please read the instructions carefully and follow the assembly steps.

To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
To prevent misalignments, keep the screws loose and do not tighten them until they are all in their correct positions.
Avoid overtightening or forcing the screws, as this could cause them to break, strip, or damage the threads of the holes.
Using the wrong size of screws for a particular part could cause damage to the screw or the part.
Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months, or as needed.

PRODUCT FEATURES

Pneumatic Seat Height Adjustment

Pulling the lever upwards enables height adjustment of the seat, then the seat can be locked at a fixed height by releasing the lever.

Rock Tension Adjustment

Simply adjust the knob counterclockwise to tighten the tension of rocking. Or loosen the tension by turning the knob clockwise whenever needed.

Tilt Angle Adjustment

Simply pull up the lever and recline back to adjust the tilt angle, and then push down to lock the backrest.

SAFETY INFORMATION

WEIGHT CAPACITY FOR SEATING: 350LBS

• Sit in the center of the chair with your back against the backrest

• Do not sit at the front edge of the chair

• Do not push the chair around when a person is sitting in it

• Do not stand on the chair

• Do not push down on the backrest when a person is reclined

• Do not use the chair with more than one person

• Do not place all your weight on the backrest only

ASSEMBLY PARTS AND TOOL

BEFORE YOU GET STARTED, A FEW POINTERS:

 Having a friend to help makes assembly extra-easy
 Mind the important safety information

1. Back Cushion *1

2. Seat Cushion *1
   

3. Arms *2

4. Star Base *1

5. Seat Plate *1

6. Head Pillow *1

7. Lumbar Pillow *1

8. Angle Adjuster *2
   

9. Lower Adjuster Cover *2

10. Upper Adjuster Cover *2

11. Gas Piston and Cover *2

12. Casters *5

13. Bolts M825mm 20

14. Bolts M58mm 4

15. Wrench *1

ASSEMBLY INSTRUCTIONS

Step 1
Turn the Star Base(4) upside down, and press the Casters(12) into the holes at the end of each base leg. Insert the Gas Piston (11) into the center hole of the Star Base(4), the Gas Piston Cover(11) should be placed over the gas piston.

Step 2
Align the Seat Plate(5) over the pre-drilled holes underneath the Seat Cushion(2), make sure that the front of the Seat Plate(5) is facing the front of the Seat Cushion(2). Attach the Seat Plate to the Seat Cushion(2) using FOUR Bolts M8*25mm(13), tighten all the bolts with the Wrench(15), being careful not to miss-thread the bolts or damage the Seat.

Step 3
Attach the Arms(3) to the Seat Cushion(2) with EIGHT Bolts M8*25mm(13) by using the Wrench(15).
Note 1 : Armrests are labeled with an “L” (left) or “R” (right) to show which sides they should be placed on.

Step 4
Turn the Seat Cushion(2) upright and align the center hole of the mechanism over the Gas Piston(11), then push the Seat Cushion(2) down onto the Gas Piston(11) firmly until the connection is secure.

Step 5

Connect Back Cushion(1) and Seat Cushion(2) with Angle Adjuster(8), tighten EIGHT M8*25mm Bolts(13) with Wrench(15).
Adjust the balance of the seat cushion and back cushion, then tight all bolts to 100% at this step.

Step 6
Attach TWO Lower Angle Adjuster Covers(9) then TWO Upper Angle Adjuster Cover(9) with FOUR M5*8mm Bolts (14), using the Wrench(15).

Step 7
Put the Head Pillow(6) and Lumbar Pillow(7) on the chair.

LIMITED WARRANTY

FUQIDO promises to repair or replace any FUQIDO chair found to be defective in material or workmanship within one year of your purchase as the original purchaser. This warranty is subject to the following provisions.

EXCLUSIONS

This warranty does not apply and no other warranty applies to:

• Normal wear and tear, which are to be expected over the course of ownership.
• Misuse, abuse, or excessive use of the product.
• Modifications or attachments to the product that are not approved by FUQIDO.
• Products that were not installed, used, or maintained in accordance with product instructions and warnings.
• Products used for rental purposes or unauthorized retail activities.

Seating Usage: Normal use for seating is identified as the equivalent of a single shift, forty- (40) hour workweek. To the extent that a seating product is used in a manner exceeding this, the applicable warranty period will be reduced in a pro-rata manner.

RETURN POLICY

We adopt a 30-day return policy which means that all products purchased on this website may be returned to us within the timeframe. You need to contact us within 30 days after the product(s) came into your possession and the product(s) must be returned to us without any undue delays.

Returned products must be returned in the same condition as they were sent and they must be sent in their original packaging.

If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with the product for some other reason), the cost of shipping will fall on you. And it is your responsibility that the package arrives safely to us so we recommend that you use a courier service where it is possible to track the shipment.

If the product is faulty when you receive it, please contact us and we will help you out.

We reserve the right to give a partial refund in cases when the product(s) is not in an unused condition, is damaged or has missing parts, not due to our error.

HOW RETURNS WORK

To request a return, please fill out the contact form on our website and attach a copy of your invoice as proof of purchase and the reason for your return in the message.

Then we will provide the return address for the product as soon as possible.

Once the returned product has been received by us and inspections have been completed, a specific disposition will be provided to you.

If the return is approved, we will automatically credit the purchase amount back to your original method of payment.

 ASSEMBLY VIDEO

TEL
800-507-2215
WEB
www.fuqidochair.com
E-MAIL
service@fuqidochair.com

CAUTION: FUQIDO DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.

References

• FUQIDO Gaming Chair | Superior Comfort and Trendy Design Gaming Chair – FUQIDO Chair

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>