VMAC A500003 RAPTAIR60 Diesel Driven Compressor Instruction Manual
- June 15, 2024
- VMAC
Table of Contents
VMAC A500003 RAPTAIR60 Diesel Driven Compressor
Product Information
Specifications
- Product Name: RAPTAIR60 Diesel Driven Compressor
- Model Number: A500003
- Document Number: 1900918
- Version: A
- Copyright: 2011
- Toll Free: 1-800-738-8622
- Local: 1-250-740-3200
- Fax: 1-250-740-3201
Product Usage Instructions
Fuel Tank Installation
- The fuel tank will be installed on the rear (right hand side of the service panel) of the RAPTAIR60 using four existing mount bolts and one supplied bolt.
- Remove the two M8 flange head bolts on the rear upper left and right hand corners.
- Loosen, but do not remove the two lower vertical separator tank mount bolts. You will need a supplied M8 flange head bolt that will be installed from the bottom up, with the supplied M8 flange head nut on the inside of the RAPTAIR60.
- Connect supply and return fuel lines from the RAPTAIR60 to the fuel tank using supplied hose clamps. The supply line is 5/16 and the return line is 3/16.
- Connect the fuel level sensor to the RAPTAIR60 harness.
FAQ
Q: How should I install the fuel tank on the RAPTAIR60?
A: Follow the steps provided in the “Fuel Tank Installation” section of the user manual.
Q: What size are the supply and return fuel lines?
A: The supply line is 5/16 and the return line is 3/16.
Q: Where can I find more information or get support for the RAPTAIR60?
A: For more information or support, please contact VMAC at the provided Toll Free or Local numbers.
Important Information
- The information in this manual is intended for certified VMAC installers who have been trained in installation procedures and for people with mechanical trade certification who have the tools and equipment to properly and safely perform the installation. Do not attempt this installation if you do not have the appropriate mechanical training, knowledge and experience.
- Follow all safety precautions for mechanical work. If you have difficulty with the installation, contact VMAC.
- To order parts, contact your VMAC dealer. Your dealer will ask for the VMAC serial number, part number, description and quantity. To locate your nearest dealer, call 1-800-738-8622.
Notice: Manuals and products are subject to change without notice
Document #1900918
Version| Revision Details| Revised by/date| Approved|
Implemented
---|---|---|---|---
A| Release| SH 13 Sep2011| SM 13 Sep 2011| 13 Sep 2011
Copyright 2011
All trademarks used in this manual are the property of the respective
copyright holder.
The contents of this manual may not be reproduced in any form without the
express written permission of VMAC, 1333 Kipp Road, Nanaimo, BC V9X 1R3.
Printed in Canada
VMAC – Vehicle Mounted Air Compressors Toll Free: 1-800-738-8622 Local: 1-250-740-3200 Fax: 1-250-740-3201
Fuel Tank Installation
- The fuel tank will be installed on the rear (right hand side of the service panel) of the RAPTAIR60 using four existing mount bolts and one supplied bolt.
- Remove the two M8 flange head bolts on the rear upper left and right hand corners
- Loosen, but do not remove the two lower vertical separator tank mount bolts. You will need approximately ¼” to slide the fuel tank into place.
- Slide the fuel tank into place. Fasten with previously removed and supplied fasteners. Note the supplied M8 flange head bolt will be installed from the bottom up, with the supplied M8 flange head nut on the inside of the RAPTAIR60.
- Connect supply and return fuel lines from the RAPTAIR60 to the fuel tank using supplied hose clamps. The supply line is 5/16″ and the return line is 3/16″
- Connect the fuel level sensor to the RAPTAIR60 harness.
VMAC – Vehicle Mounted Air Compressors Toll Free: 1-800-738-8622 Local: 1-250-740-3200 Fax: 1-250-740-3201
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>