Rodtech WE800 Wireless Inspection Camera User Manual
- June 3, 2024
- Rodtech
Table of Contents
Rodtech WE800 Wireless Inspection Camera
FEATURES
This portable wireless inspection camera is our company newly developed simple and convenient inspection instrument. It’s a new product that combined the technology of electronics, optics and 2.4GHz wireless. It’s very small size and light weight, very convenient to carry; can be applicable in the dangerous & complicated surroundings, like highaltitude working. It’s easy operated and powered by high capacity Li-battery with 1.5 hours continuous working time. High brightness LED/IR offers long visible range up to 8 meters. Moreover, it offers high definition video and good performance. If it works with our wireless DVR-TE968H, users can as inspect according to video, as record. Look over some recorded video repeatedly. If the video is not satisfactory, users can delete it and rerecord. DVR memory is large up to 32GB.If it works with wireless USB receiver, users can view instant video in computer, and record, edit and print the inspection report.
APPLICATION
This piece of equipment has the principal use for seeing places and objects hard to see easily or even with mirrors. It is mainly used as a reference tool, although you can record the images direct to the DVR screen. It has great application, when safely checking that bird nest have been removed after sweeping, or behind back boilers/vents and also on register plates. It is further used in many other aspects of visual work including; all kinds of pipe & tube, building inspection; antiterrorism search & rescue; Safety inspection; archaeology, etc.
WARNING
- Please don’t charge the camera with other AC adapter
- Please don’t charge the camera for too long time.
- Take care of lens cover when using this product
OPERATION
Charge
Plug the AC adapter into the DC socket of the camera, Charge Indicator
turns red. After fully charged, the red indicator will turn off automatically.
Power ON
Press the Power ON/OFF button on the rear of the camera continuously for
about 3 seconds to power on the camera. LED light on, the camera starts to
work. Point the camera to the inspection objects and at the same time power on
any 2.4GHz wireless receiver (e.g. DVR/monitor/computer) to receive and record
instant video.
LED/IR lamps ON/Highlight/OFF
When the camera and LED/IR lamps are on, press the Power ON/OFF button
once, lamps highlight; press again, lamps turn off. It cycles in this turn:
lamps on, lamps highlighted, lamps off.
Power OFF
When the camera is on, continuously press the Power ON/OFF button for 3
seconds, the lamps turn off and the camera stops working.
SPECIFICATIONS
| Frequency | 2414Mhz(CH1) |
|---|---|
| RF Output Power | 50mW (300 feet in line of sight) |
| Total Pixels | PAL:720 X 576 NTSC:720 X 480 |
| Minimum Illumination | 0.01Lux / F1.2 |
| Lens Focus | 1-100cm (adjustable) |
| View Angel | 90° |
Light Source
| LED| 2200mcd x 6 Range of LED lamp: 5 meters
IR/940nm| 70mW x 6 Range of IR940 lamp: 5 meters
IR/850nm| 70mW x 6 Range of IR850 lamp: 8meters
Li-battery Capacity| 380MAH
Working Time| 1.5 hours
Charge Time| 1.5 hours
Voltage| DC 5V
Current| Lamp off:160mA Lamp on: 260mA Lamp
Weight| 35g
Size（DXL）| 20mm X 84mm