FUQIDO 5110 Big and Tall Gaming Chair Instruction Manual
- June 14, 2024
- FUQIDO
Table of Contents
INSTRUCTION MANUAL
Model No.: 5110
WARNING
Please read the instructions carefully and follow the assembly steps.
To ensure proper assembly, please follow all steps and use all parts provided.
Not following this warning may result in serious injury to you or others.
To prevent misalignments, keep the screws loose and do not tighten them until
they are all in their correct positions.
Avoid overtightening or forcing the screws, as this could cause them to break,
strip, or damage the threads of the holes.
Using the wrong size of screws for a particular part could cause damage to the
screw or the part.
Please lubricate all moving parts regularly and tighten all bolts and screws
every 6 months, or as needed.
PRODUCT FEATURES
Pneumatic Seat Height Adjustment
Pulling the lever upwards enables height adjustment of the seat, then the seat
can be locked at a fixed height by releasing the lever.
Rock Tension Adjustment
Simply adjust the knob counterclockwise to tighten the tension of rocking. Or
loosen the tension by turning the knob clockwise whenever needed.
Tilt Angle Adjustment
Simply pull up the lever and recline back to adjust the tilt angle, and then
push down to lock the backrest.
SAFETY INFORMATION
WEIGHT CAPACITY FOR SEATING: 350LBS
| Sit in the center of the chair with your back against the backrest
---|---
| Do not sit at the front edge of the chair
| Do not push the chair around when a person is sitting in it
| Do not stand on the chair
| Do not push down on the backrest when a person is reclined
| Do not use the chair with more than one person
| Do not place all your weight on the backrest only
ASSEMBLY PARTS AND TOOL
BEFORE YOU GET STARTED, A FEW POINTERS:
Having a friend to help makes assembly extra-easy
Mind the important safety information
LEASE MAKE SURE ALL THE PARTS ARE INCLUDED.
MISSING PARTS? [email protected]
ASSEMBLY INSTRUCTIONS
Step 1
Turn the Star Base(4) upside down, and press the Casters(12) into the holes at
the end of each base leg. Insert the Gas Piston (11) into the center hole of
the Star Base, the gas piston cover should be placed over the gas piston.
Step 2
Align the Seat Plate(5) over the pre-drilled holes underneath the Seat
Cushion(2), make sure that the front of the Seat Plate is facing the front of
the Seat Cushion. Attach the Seat Plate to the Seat Cushion using FOUR Bolts
M825mm(13), tighten all the bolts with the Wrench(15), being careful not to
miss-thread the bolts or damaged the Seat.
Step 3
Attach the Arms(3) to the Seat Cushion(2) with EIGHT Bolts M825mm(13), using
the Wrench(15).
Note 1: Armrests are labeled with an “L” (left) or “R” (right) to show which
sides they should be placed on. 
Step 4
Turn the Seat Cushion(2) upright and align the center hole of the mechanism
over the Gas Piston(11), then push the seat cushion down onto the Gas
Piston(11) firmly until the connection is secure.
Step 5
Connect Back Cushion(1) and Seat Cushion(2) with Angle Adjuster(8), tighten
EIGHT Bolts M825mm(13) with Wrench(15).
Adjust the balance of the seat cushion and back cushion, then tight all bolts
to 100% at this step.
Step 6
Attach two Lower angle Adjuster Covers(9) then two Upper angle Adjuster
Cover(10) with FOUR Bolts M58mm(14), using the Wrench(15).
Step 7
LIMITED WARRANTY
FUQIDO promises to repair or replace any FUQIDO chair found to be defective in
material or workmanship within one year of your purchase as the original
purchaser. This warranty is subject to the following provisions.
EXCLUSIONS
This warranty does not apply and no other warranty applies to:
- Normal wear and tear, which are to be expected over the course of ownership.
- Misuse, abuse, or excessive use of the product.
- Modifications or attachments to the product that are not approved by FUQIDO.
- Products that were not installed, used, or maintained in accordance with product instructions and warnings.
- Products used for rental purposes or unauthorized retail activities.
Seating Usage: Normal use for seating is identified as the equivalent of a
single shift, forty- (40) hour workweek. To the extent that a seating product
is used in a manner exceeding this, the applicable warranty period will be
reduced in a pro-rata manner.
RETURN POLICY
We adopt a 30-day return policy which means that all products purchased on
this website may be returned to us within the timeframe. You need to contact
us within 30 days after the product(s) came into your possession and the
product(s) must be returned to us without any undue delays.
Returned products must be returned in the same condition as they were sent and
they must be sent in their original packaging.
If the product is not faulty, (i.e. if you changed your mind or if you are
unhappy with the product for some other reason), the cost of shipping will
fall on you. And it is your responsibility that the package arrives safely to
us so we recommend that you use a courier service where it is possible to
track the shipment.
If the product is faulty when you receive it, please contact us and we will
help you out.
We reserve the right to give a partial refund in cases when the product(s) is
not in an unused condition, is damaged or has missing parts, not due to our
error.
HOW RETURNS WORK
To request a return, please fill out the contact form on our website and
attach a copy of your invoice as proof of purchase and the reason for your
return in the message.
Then we will provide the return address for the product as soon as possible.
Once the returned product has been received by us and inspections have been
completed, a specific disposition will be provided to you.
In addition, if the return is approved, the refund amount will be
automatically credited to your original payment method.
CAUTION: FUQIDO DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY
OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY
ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
https://youtu.be/JGo9uyIjyYM
TEL
800-507-2215
WEB
www.fuqidochair.com
E-MAIL
[email protected]