NEW ENGLAND 400003 Water Spot Watering Sprinkler Instruction Manual
- May 15, 2024
- New England
Table of Contents
Water Spot Sprinkler
MOD: 400003
IMPORTANT SAFEGUARDS
Read these instructions before use. If this product is passed to a third
party, these instructions must be included.
When using the product, safety precautions should be followed to reduce the
risk of injury, including:
For outdoor use with cold water only.
Do not use near electrical components.
Check all parts before using the product. Do not use if parts are damaged.
Operate in an upright position only.
Do not modify the product.
Turn the water off after each use.
Do not use the product for any other purpose for which it was not intended.
Do not operate at high water pressure, see Section 7.
Do not leave water running or unsupervised.
Do not expose the product to freezing temperatures with water remaining in the
product.
This product ls not intended to handle drinking water.
DANGER Risk of suffocation!
Please remove and keep packaging materials away from children and pets.
Intended Use
This product is intended to water a lawn or garden patch.
Product Description
(A) ring nut to hose
(B) Sonner boy
(C) INtake fitter
Product Usage and Function
CAUTION Risk of damage! Please ensure the water supply does not exceed the maximum pressure.
Position the sprinkler on the surface, making sure the Base is level and
upright. Do not operate the sprinkler with a tilted Base.
Attach the garden hose to the Fixing nut.
Turn the water tap on. Water comes out the selected nozzles on the wheel.
After use, turn off the water supply and disconnect the sprinkler from the
hose.
4.1 Operating tips:
Remove any obstructions which can interfere with the water spray.
Water at cooler temperatures to minimize loss to evaporation, e.g. mornings.
Water for a period of at least 30 minutes to obtain deep root moisture.
Install a sediment filter to the garden hose to minimize clogging of the
nozzles.
Coverage is very important to maximize the use of the water and minimize loss
of water on other surfaces, e.g. paved roads.
We suggest some initial observation of the working sprinkler to ensure
coverage is satisfactory.
After use, drain water from the product.
Cleaning and Storage
4.1 General cleaning.
To clean, wipe with a soft, damp cloth, Microfiber preferred.
Never use gasoline, acetone, or any other corrosive chemicals. Never use metal
brushes or sharp utensils to clean the sprinkler.
4.2 Storage.
Drain water out of the product before storage.
Avoid storing the product at conditions below 32F.
4.3 Unclogging the nozzle.
Use any fine metal pin or paper clip.
Frequently Asked Questions
| Problem: | Solution: |
|---|---|
| The Sprinkler Wheel has single spray pattern | When the water pressure is too |
low, the spray is very weak
Check for a partially open tap.
Check for an obstruction in the hose, e.g. kink.
Clean the Intake filter.
The Sprinkler does not water| Remove any obstructions which could interfere
with the operation of the tube
Check for water flow.
The spray patter is irregular| Remove any obstructions in the nozzles
Unclog the nozzle.
Rinse the product.
The nozzle clogs frequently| Install a sediment filter to the water supply.
Replace the hose.
Change water supply.
Specifications
| Working pressure | 20 – 60 psi |
|---|---|
| Flow rate | 2.0-4.0 gal/min |
| Operating temperature | 33F – 105°F |
| Storage temperature | 33°F – 105F |
| Weight | 40z |
| Dimensions (in) | 4″x3″x2″ |