STARRY ES19 Night Light Projector Instruction Manual
- June 5, 2024
- STARRY
Table of Contents
STARRY ES19 Night Light Projector
Introduction
Remote Control Star Projector is an upgrade to the standard Projector Night Light. This deluxe Starry Rotating Night Light Projector can rotate and project colorful light onto a smooth ceiling or wall, creating a relaxing, intimate, and cozy atmosphere.
Remote Control
Use 2 batteries ( AAA 1 .5V )
Installation steps
- Rotate counter-clockwise to open the rocket base.
- Align the rocket’s 3 brackets to the slotted position to install correctly.
- Rotate clockwise to reassemble the rocket base.
Note: Do not rotate the rocket base too tightly when assembling as this will cause it to loosen again.
Charging Mode
Power input:
When charging, the light is red, and when it is fully charged, the red light
is off.
Built-in lithium battery
Use the USB cord (included in the package) and adaptor ( not included in the
package, please prepare your owns) to connect the rocket base to a standard
outlet.The battery will be fully charged after 5-6 hours of charging.
When fully charged, the product will work for 13-14 hours.
It can charge while in use.
Note: Do not use in outlets where the voltage is over 5V. Cannot be charged by computer. Only use the adapter to charge.
Function Instructions
Remove the top cover
- Boot: Turn on the unit using the switch on the side of the product. Then short press the power button. At this point, the screen will show the number “000.”
- Timed shutdown: Press the “Time Control” button to create a timed shutdown of the machine. Each additional press will add 5 minutes.
- Warm Light: Short press the “Warm Light” button on the machine.
- Change color: Press the “Change the light’s color” button to switch the color of the light.
- Rotating function: Press the “Rotating” button to direct the machine to rotate.
Note: The switch on the side of the product should be turned off when the projector is not running.
Product Features
Input Voltage: 5.1 V
Working output Voltage: 4.1 V
Working output current: 250mA
|Power: 4.5W
lithium Battery Capacity: 1200mAh
Built-in lithium rechargeable battery.
Package Included
- 1 x Star Projector Night Light
- 1 x 2m USB Cable
- 1 x User Manual
- 1 x Remote control
- 1 x After sales card