NEW ENGLAND GARDEN TOOLS 300010 Lawn Pulsating Impact Sprinkler Instruction Manual
- June 2, 2024
- NEW ENGLAND GARDEN TOOLS
Table of Contents
NEW ENGLAND GARDEN TOOLS 300010 Lawn Pulsating Impact Sprinkler
IMPORTANT SAFEGUARDS
Read these instructions before use. If this product is passed to a third party, these instructions must be included.
When using the product, safety precautions should be followed to reduce the risk of injury, including:
- For outdoor use with cold water only.
- Do not use near electrical components.
- Check all parts before using the product. Do not use it if parts are damaged.
- Operate in an upright position only.
- Do not modify the product.
- Turn the water off after each use.
- Do not use the product for any other purpose for which it was not intended.
- Do not operate at high water pressure, see Section 7.
- Do not leave the water running or unsupervised.
- Do not expose the product to freezing temperatures with water remaining in the product.
- This product is not intended to handle drinking water.
DANGER Risk of suffocation!
Please remove and keep packaging materials away from children and pets.
Intended Use
This product is intended to water a lawn or garden patch.
Product Description
- A. Fixing nut to hose
- B. Range control
- C. Intake filter
- D. Base/Spike
- E. Spray Pin
- F. Jet Distance Control
Product Usage and Function
CAUTION
Risk of damage!
Please ensure the water supply does not exceed the maximum pressure.
- Position the sprinkler on the surface, making sure the Base is level and upright. Do not operate the sprinkler with a tilted Base.
- Attach the garden hose to the Fixing nut.
- Turn the water tap on. Water comes out of the nozzle and the sprinkler head should start moving/pulsating.
- After use, turn off the water supply and disconnect the sprinkler from the hose.
Operating tips
- Remove any obstructions which can interfere with the movement of the Sprinkler head.
- Water at cooler temperatures to minimize loss to evaporation, e.g. mornings.
- Water for at least 30 minutes to obtain deep root moisture.
- Install a sediment filter to the garden hose to minimize clogging of the nozzles.
- Coverage is very important to maximize the use of water and minimize loss of water on other surfaces, e.g. paved roads.
- Please study the shape and geometry of your lawn and choose the proper coverage settings.
- We suggest some initial observations of the working sprinkler to ensure coverage is satisfactory.
- Please check the Range controls every time before usage.
- After use, drain water from the product to extend the life of your sprinkler.
Adjusting the coverage/range
The coverage is adjusted using the Range controls.
Full coverage: full circle
Partial coverage: 1/4 circle
Partial coverage: ¾ circle
Partial coverage: ½ circle
Adjusting the spray pattern.
Use the Spray pin.
Adjusting the jet distance.
Use the Jet Distance Control.
Cleaning and Storage
General cleaning
- To clean, wipe with a soft, damp cloth. Microfiber preferred.
- Never use gasoline, acetone, or any other corrosive chemicals. Never use metal brushes or sharp utensils to clean the sprinkler.
Storage
- Drain water out of the product before storage.
- Avoid storing the product at conditions below 32°F.
Unclogging the nozzle.
Use any cylindrical object 1/16″ in diameter.
Frequently Asked Questions
Specifications
- Working pressure 20 – 100 psi
- Flow rate 3.0 – 5.0 gal/min
- Operating temperature 33° F – 105° f
- Storage temperature 33°F – 105°F
- Weight 11 oz
- Dimensions (in) 5″ x 3″ x 12″
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>