Venture HEAT D616A Dive Vest User Guide

welcome to
User’s Guide
Model:D616A/D617A/

User Guide for 0616A/D617A4 ….1
User Guide for D620A ….7
Heated Diving Undersu it

Product overview

1. Input connector
2. Nut
3.  Battery pocket
4. Haptic feedback receiver
5. LEO heat level indicator
6. Wristband remote controller
7. Heating evel push button
8. Heat level indicator lights
9. Li-ion battery
10. Battery connectors (input & Output)
11. Battery on/off button
12. Battery capacity indicator LED
13. Battery waterproof cover cap
14. Charging terminal

User Guide

Step 1. Plug in and turn on the batteries

Warning: Tighten the nut to avoid damage caused by water seepage.

1. insert the plug into the battery
2. Slide the nut towards the connector
3. Turn mut to tighten
4. Turn on battery: press and hold the battery button for 2 seconds to turn on the battery

Step 2. Operating your heated dive undersult
A. Powering OWN the suit:

1. On the wnstband remote, press and hold the push button for 2 seconds undl it indscates 1 LEO light (low heat)
2. The suit will smultaneously indicate 1 LED light and vibrate ance

B. Adjusting the heat level:

1. On the wristband remote, push the button to select your desired heat level
2. For each setting, your remote contro! will illuminate, and your suit’s haptic feedback reciever will both illuminate and vibeate:
   

C. Powering OFF the undersuit:

1.  On the wristband remote, press and hold the push button for 2 seconds until the indicator lights turn off
2. The LED indicator an the suit will simultaneously turn off and long wbrate once

Charging your Wristband Remote

A. Checking wristband remote battery level:

1. On the wasthand remote, click the push button once

2. The indicator hight will flash briefty to indicate remaining charge:

B. Charging your wristband remote control:

1.  Push wristband remote control onto the charging Stand .

2.  Connect charging dock with USB-C charging cable.

3. Connect USB-C charging cable to an adaptor, and plug into a power outlet.
   

Tip:

1. When your westbend renote’s charge reaches 30%. one of the LEDs will top flashing the other two LEDs wil continue to fash)
2.  AX 60% charge, two LEDs wll stop flashing lone LED wal reenan flashing)

Charging your Battery

A Checking battery status:

1. On the battery, click the push-button once
2. The indicator ght will flash briefly to indicate remaining charge:
   

B. Chacging batteries:

1. Connect batteries to Y-splitter charging harness
2. Connect Y-spidter charging harness to charger.
3. Plug the charger into a power outlet.

Tip:

1. Your diving undersuit and wristband remote control comes pelred from the factory and does net require setup
2. If at any posnt your suit does not respond to yout remote control, pair your femoate control as detailed in Section 5 (next page)

Pairing your Wristband Remote

A. Place your wristband remote within close range (6 inches) of the haptic feedback recerer on your sutt
B. Connect ONE battery to your suit while pairing your remote. Do not plug in the second battery for this process.

C. Press and hold the battery’s push button for 2 seconds to switch the battery ON and OFF. Repeat thes 3 mes slowly with 2 second intervals, and you can expect the follawang:
1st: Turn on battery. Lights on hapnc feedback receiver will show for 2 seconds. Turn off battery.

2nd: Turn on battery. Ughts on haptic feedback receiver will show for 2 seconds. Turn off battery.

3rd: Turn on battery. Lights on haptic feedback receiver will flash, indicating that pairing is complete.
Tip: If painng tails. repeat above steps

Indicator will flash repeotecty Pairing complete

Product Overview

1. Input connector
2.  Nut
3.  Battery pocket
4. Li-ion Battery
5. Battery connectors (input & Output}
6.  Battery on/off button
7. Battery capacity indicator LED
8. Battery waterproof cover

User Guide
Step 1. Plug in the battery before entering water

Warning: Tighten the nut to avoed damage caused by water seepage.

1. Insert the plug into the battey
2. Slide the nut towards the connector
3.  Turn nut to tighten

Step 2. Turning your battery on/off
A. To turn ON your suit, press and hold the battery’s push button for 2 seconds. The battery’s indicator lights will illuminate.
B. To turn OFF your suit, press and hold the battery’s push button for 2 seconds. The battery’s indicator lights will turn off.

Charging your Battery
A. Checking battery status:

1. On the battery, click the push-button once
2. The indscator light will flash briefly to indicate remaining charge.
   

B. Charging batteries:

1. Connect batteries to charging harness
2.  Connect charging harness to charger.
3. Plug the charger into a power outlet

Important Precautions (Best Practices)
After each use:

1. Throughly rinse and clean all equigment (including battery, undersult, and wristband remote) with fresh water and air dry immediatety. This is an important step to avoid seawater corrosion and remove any salt deposits on the heating elements.
2. Cover all battery connectors with the protective cap to prevent seawater oxidization of the metal connector tps.

Note: Oxidization of the connectors and undersuit resulting from exposure to saltwater is NOT covered under manufacturer warranty.
Maintenance:

1. Always remove battery before washing.
2.  If you choose to machine wash the undersuit, be sure close all protective caps and use the enclosed laundry bag. Machine wash with cold water only. Tumble dry on low heat.

Troubleshooting Tips

1. If the battery ts empty, refer to Section 4 to charge your battery.

2. If the remote controller is out of battery, follow Section 3 to charge remote controller.

3. If the wristband remote fails to control temperature, then it needs to be re-paired.
   Follow Section 5 to perform pairing.

4. If your suit does not function, refer to Sections 1, 2, and 3. If you need further assistance, contact Customer Service (see last page)

Wash and Care

Remove the battery before washing. Use the included laundry bag.

Machine wash gentle (with lsundry bag)
Machine wash cold worh at sty tempersture below 85°F/30° c
Machine dry delicate
Dry on low heat
Do not iron
Do not bleach
Do not dry clean

Warnings
Not recommended for children of people with health conditions.
Heating elements shoutd never have direct contact with bare skin.
Shut power off immaciiately if discaméort occurs.
Ory use the manufacturer’s recommended battery (never use over 12 voit)
Do not tamper with wire of connectors to avoid danger.

Installing the (optional) Extension Panel

If your undersuit fits too tight, you may choose to install the extension panel on the ngnt waist side to extend the waistline.

Venture Heat One (1) Year Limited Warranty

Thank you for purchasing tvs Venture Heat product. Thes Lenited Warranty covers defects in heated electrank components and battery for one {1) year fram the initial date of purchate trom an authorwed Venture Heat dealer. This warranty & non-transferable, and proof of purchase is required for warrenty service.
Warranty does not cover wear and tear of the garment, fabric, repper and other accessories are not Covered under thas warranty. Oudhzation of battery connectors or garment resulting from eaposure to saltwater 6 not covered under manufacturer warranty. Under no oroumstances wél Venture Heat be heble for the incidertal, consequential, of punitiwe demages resulting from the product, whether of nat the product & found ta be covered by this warranty.
Damages to the heating system or parts reuating trom modification, acciders, fire, flood, misuse, unauthorized seruce or negligence outlined in the wstructions pnrted herein will vord the warranty.
Designed for personal use only, using them for commercial purposes voids the werramty.
For more warranty information, contact your local Venture Meat detributor:
USA & ikernational venturemeat.com/cortact
Aastraba. www.zartte.com.au

Questions?
ventureheat.com/contact
(877) 261-9477

Scan with camera for instructional video ventureheat.com/dve- guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>