venture HEAT BT-500 Series Men’s Bluetooth Softshell Heated Jacket with Battery User Guide

venture HEAT BT-500 Series Men’s Bluetooth Softshell Heated Jacket with

Battery

Download the Add Heat App

Connect battery

• Control with the App
  • Step 1: Turn on the Bluetooth Open app.
  • Step 2: Pairing  Add a new device
  • Step 3: Select device BT-SOO
  • Step 4: Turn ON/OFF
  • Step 5: Tap to adjust the temperature
  • Step 6: Easily switch between devices

LED Indicate

BT-500 senes

BT-501CHS / BT-502CHS / BT-503CHS / BT-504CHS Bluetooth Heating Systems SKU#: 0 Bluetooth

• FCCID:2AVJJBT501CHS
• IC: 27 439-BT501 CHS
• service@ventureheat.com Toll Free 1-877-261-9477 www.ventureheat.com

Powered by:

IC:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

•  this device may not cause interference, and
•  this device must accept any interference, including interference that may cause undesired operation of the device.

IC Notice:
This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.This Class B digital apparatus complies with Canadian ICES-003. (Cet appareil numerique de la classe Best conforme a la norme NMB-003 du Canada.) Radiation Exposure Statement: The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

CE:

Safety warning

Do not use the device in the environment at too high or too low a temperature. The suitable temperature for the product and accessories is 32° to 86°F (0°-30°C) BT-500

• Operating Frequency Range: 2400-2483MHZ
• Max Output Power: 1.lldbm(EIRP)
• Manufacturer: MEC Add heat Co., Ltd.
• Address: No.2-1 Alley 1, Ln. 116, Zhuang-Jing Rd. East Dist. Tainan City, Taiwan
• Importer: Matsum Inc DBA Venture Heated Clothing
• Address: 3621 Serpentine Drive, Los Alamitos, CA 90720, USA
• E-mail: service@ventureheat.com
• EU Regulatory Conformance

Hereby, MEC Add heat Co.,Ltd. Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site www.addheat.com/certification.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

•  This device may not cause harmful interference,
•  this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>