venture HEAT BT-1200 Series BT-120020CHS Bluetooth Heating Systems User Guide
- June 6, 2024
- venture HEAT
Table of Contents
**venture HEAT BT-1200 Series BT-120020CHS Bluetooth Heating Systems User Guide
**
Installation Instructions
-
Download the AddHeat App
_iOS/Android
_
-
Connect Battery
-
Control with the App
-
Step 1:
Turn on bluetooth Open app.
-
Step 2:
Pairing: Add a new device
-
Step 3: Select device BT-1200
-
Step 4:** Turn ON/OFF
** -
Step 5: Tap to adjust temperature
-
Step 6: Easily switch between devices
Direct control by yourself
-
Step 1: Press and hold the button for 3 seconds to power ON or OFF
-
Step 2: Click once to select heat level
-
Red High Heat
-
Yellow Medium Heat
-
Green Low Heat
Bluetooth Heating Systems
FCC ID: 2AVJJBT120035CHS
IC: 27439-BT120035CHS
CE
Safety warning
Do not use the device in the environment at too high or too low temperature.
The suitable temperature for the product and accessories is 32° to 86°F
(0°-30°C ) BT-120035CHS
Operating Frequency Range: 2402-2480MHZ
Manufacturer: MEC ADDHEAT CO.,LTD.
Address: Building 7 West Block, No. 1 West Lake Second Road Cuishanhu New
District, Kaiping City, Guangdong,China
Company: Matsum Inc DBA Venture Heated Clothing
Address: 3621 Serpentine Drive, Los Alamitos, CA 90720,USA
E-mail: service@ventureheat.com
EU Regulatory Conformance
Hereby, MEC ADDHEAT CO.,LTD. Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
For the declaration of conformity, visit the Web site www.addheat.com/certification.
FCC
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment.
Radiation Exposure Statement
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
IC Notice
This device compliesn with RSS-247 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference. This Class
B digital apparatus complies with Canadian ICES-003.
Radiation Exposure Statement
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Powered by:
Customer Support
Email: service@ventureheat.com
Toll Free: 1-877-261-9477
Web: www.ventureheat.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>