Crystal CVT-3010W 720P Wireless Replacement Camera User Guide

Crystal CVT-3010W 720P Wireless Replacement Camera

Product Information

Specifications:

• Power Adapter : DC 12V 3A
• Power Adapter (for Ethernet Use): DC 12V 1A
• Connection: Ethernet Port
• Cable: CAT5e Ethernet Cable (for Ethernet Use)

Product Usage Instructions

How to Sync Camera:
Before Adding a New Camera:

1. Connect the power to both the system and the camera.
2. Ensure that both devices are powered on.
3. Place the NVR system and camera close to each other.
4. (for Button use only) Check the status light on the camera to confirm that it is in Sync mode, indicated by rapid blinking.
5. (for Ethernet use only) Connect the camera to the NVR system using an Ethernet cable.
6. If the status light is not rapidly blinking, try resetting the camera to send it back into Sync mode.

Adding a New Camera :

1. Look for a button at the bottom of the menu bar to add a new camera.
2. Click the continue button to start searching for new cameras.
3. Wait for the NVR to automatically search for cameras for 30 to 40 seconds.
4. Once the search is complete, your camera should appear in an empty channel in the table on the right side of the interface.
5. If the camera is successfully connected, click the continue button to proceed.
6. Check the live view for the newly-added camera to confirm proper connection.
7. (for Button use only) If you have issues with the live view, try resetting the camera to send it back into Sync mode, then initiate the search process again.
8. Once confirmed that the camera is working correctly, click the continue button to finish adding it to your system

Tip: If there is no empty channel available, delete an old or defective camera from the channel table before adding a new camera.

Frequently Asked Questions (FAQ):

1. Q: What should I do if my camera is not entering Sync mode?
   A: If your camera is not rapidly blinking to indicate Sync mode, try resetting the camera as per the provided instructions.

2. Q: How do I know if my camera is successfully connected?
   A: Check the live view for the newly-added camera to confirm proper connection. The camera should appear in an empty channel on the interface.

How to Sync Camera

Before Adding a New Camera

1. Connect the power to both the system and the camera.
2. Ensure that both devices are powered on.
3. Place the NVR system and camera close to each other.
4. (for Button use only) Check the status light on the camera to confirm that it is in “Sync” mode, which is indicated by rapid blinking.(for Ethernet use only) Connect the camera to the NVR system using an Ethernet cable.
   • (for Button use only) If the status light is not rapidly blinking, try resetting the camera to send it back into “Sync” mode.

Here’s the instruction for resetting the camera:

• Press and hold the Reset/Sync button for 10 seconds.
• Wait for 30-50 seconds for the camera to reboot.
• Check the status light on the camera to confirm that it is in “Sync” mode, which is indicated by rapid blinking.

Adding a New Camera

1. Look for a  button at the bottom of the menu bar to add a new camera.
2. Click the “continue” button to start searching for new cameras.
3. Wait for the NVR to automatically search for cameras for 30 to 40 seconds. Once the search is complete, your camera should appear in an empty channel in the table on the right side of the interface.
4. If the camera is successfully connected, click the “continue” button to proceed.
5. Check the live view for the newly-added camera to confirm that it is connecting properly.
6. (for Button use only) If you have issues with the live view, try resetting the camera to send it back into “Sync mode” (see instruction above for how to reset the Camera), then initiate the search process again.
7. Once you have confirmed that the camera is working correctly, click the “continue” button to finish adding the camera to your system.

Tip – If there is no empty channel available in the channel table for the new camera, you will need to select an old or defective camera from the channel table and delete it before adding the new camera.

How to Sync Camera

For Button Use Only

For Ethernet Use Only

Documents / Resources

| Crystal CVT-3010W 720P Wireless Replacement Camera [pdf] User Guide
CVT-3010W 720P Wireless Replacement Camera, CVT-3010W, 720P Wireless Replacement Camera, Wireless Replacement Camera, Replacement Camera, Camera
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>