LOVELEDI i6 Pro Power Bank Portable Charger 15000mAh PD User Manual
- May 15, 2024
- LOVELEDI
Table of Contents
LOVELEDI i6 Pro Power Bank Portable Charger 15000mAh PD
Thank you for your purchase!
Dear buyer,
Thank you for your purchase! As a reliable seller, I am committed to providing
products and services that make all customers! Hence, I sincerely hope that
such a shopping experience can give you a happy memory.Although your
satisfaction is our purpose, some unforeseen circumstances may occur
inevitably. Contact us immediately if you aren’t satisfied with our products,
you want to offer any suggestions, or you have other requirements for our
services. We promise to try our best to offer a satisfactory solution as soon
as possible
All the very best wishes to you
A sincere seller.
Schematic:
- Output(USB-A)
- input(Type-C port)
- output Cable(Lightning)
- Switch button
- Output Cable(Type-C)
- LED display
Power Bank Parameter
- Model No.: i6 Pro
- Battery Cell Type: Rechargeable Polymer Li-ion Cell
- Input (Type-C port): 5V/3A; 9V/2.A; Type-C Port only input (PD18W)
- Output (USB-A): 5V/3A; 9V/2.A; 12V/1.5A; 15V/2A; 20V/1.5A ;(PD30W)
- Output (Type-C Cable output): 5V/3A; 9V/3A; 12V/2.5A; lSV/2.A; 20V/1.5A; (PD30W} e Output (Lightning Cable output}: 5V/3k, 9V/2.A; 12V/1.5A;
- Charging Time: About 3 hours(Use PD30Wh adapter)
- Working Temperature: O’C-S0°C
- Product Size: (L)108X (W)53 x (H)28(men)
- Product Weight: <><187.Sg
Instructions
Product tum on
This product has an automatic detection and identification function, which can
automatically identify the cell phone device to power on the output. If it
cannot automatically identify the turn-on, please press the ‘Switch Button’ to
start.
LED display
A short press button once displays the device power remaining, when the power
bank works in the fast charging mode whether input or output, there is
‘Lightning” mark on the screen.
Quick Charging
It takes 10-20 seconds for TYPE-C and USB identification devices to charge
quickly.
Charge the power bank through power adapter
This power bank comes with one Type-C input port, connected to the phone power
adapter, you can charge for this power bank by input port, LED screen numbers
flashing. when fully charged, the power displays 100% and keep on.
When the power bank is recharging rapidly, the “Lightning” mark will light up
on the LED
Please Note:
- If swells or liquid leakage phenomenon occurs during working, stop using it immediately.
- If the type-c cable of the power bank, USB port, and Lightning cable are used to charge three mobile devices at the same time, it will lead to a voltage drop, so it may not be able to maintain the highest power to maintain fast charging mode, which is normal. Charging 1 device can maintain the highest power output.
Charge for cell phones, iPads, and other digital products
The power bank has 1 USB and 1 Type-C and Lightning cable Output port, connect
the digital product with any output port, it can charge for the digital
product During the charging process of the digital product, the LED display
lights up. The ‘Lightning ‘sign lights up as long as the digital device is
quickly charged. When the digital product is fully charged, please stop the
power supply to the digital device, and then the LED power Indicator off.
Please Note:
When the power remaining is low, the power indicator flashes for a warning,
the device can’t output at this moment.
Please Attention:
- Full charge the product with your first-time use;
- If swell, leakage, deformation, immerse in water, or short circuit occurs, stop using immediately;
- Don’t drop the device or use it in the high temperature, moist, strong magnetic environment;
- Please put the power bank on a place where kids can’t reach it;
- Don’t leave the product on the car dashboard, the high temperature will damage the device caused by strong sunlight irradiation;
- Don’t throw any debris in the input-output ports, or it may cause damage or a short circuit; To avoid abnormalities in the use of this product, please use a qualified or cell phone matching charging cable, power adapter, and other accessories;
- Don’t use the all-in-one cable to charge multiple devices simultaneously, it may cause damage to the power bank;
- Please confirm whether your device input voltage is the same as the power bank’s output voltage before charging;
- Overdischarge may occur if a long time lay aside, to not affect the performance, please fully charge and discharge the power bank at least every 3 months.
Warning:
- The device includes a Rechargeable Polymer Li-ion Cell, don’t disassemble the power bank’s shell without permission, which may cause cell damage or other danger;
- Don’t disassemble, press, puncture, or make it short circuit, don’ throw into water, fire, or exposure outside above 60°C, to avoid catching fire and other dangers;
- The device has overheat protection, it will stop working when the environment’s temperature exceeds the normal condition, you should put it in the normal environment, and then restore its output by short press the button.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>