ESP A1IPDSM1 Multi Way Outdoor Station IP65 HD with Proximity Reader User Guide
- May 15, 2024
- ESP
Table of Contents
A1IPDSM1
Quick Start Guide
Aperta IP PoE Multi Way Outdoor Station IP65 HD
with Proximity Reader
The latest product manuals and software is available online:
https://www.espuk.com/technical_support
https://www.espuk.com/technical_support/
Installation
Connect the Door Station to a switch/network or alternatively directly to a
Monitor using the RJ45 port.
If the connected network does not support PoE, then DC12V1A needs to be
applied to the 12V & GND terminals.
*All system cabling has been tested with Cat5E UTP PVC Cable.
**Maximum distance of 100m to PoE switch is supported.
Addressing the Apartment Outdoor Station
-
Enter administration mode:
When in standby, press # to enter the password entry screen, then type in the Administation Passcode, and then press #. -
When Address is selected press # to enter. If address is not selected, use the 4 and 6 keys to navigate the menu.
-
Once in the “Address” menu, press “#” to edit the address of the Outdoor Station.
A. When editing the address the field will be highlighted, use to delete a number, once all 4 digits are entered press #.
I. If it is the first Outdoor Station set to address to “0101”
II. If there are more than 1 Outdoor Station(s) the address can be any value between 0102 ~0104 -
Press to exit the Adminstration mode.
Note:
Default Admin Passcode is 666666.
A maximum of 4 Apartment Outdoor Stations per buildings are available, contact
ESP Technical for further information.
Public PIN Code
-
Enter administration mode:
When in standby, press # to enter the password entry screen, then type in the Administation Passcode, and then press #. -
Setting the Public Unlock PIN:
Once in Administration Mode select “Unlock PWD” by using the 4 and 6 keys to navigate the menus, and then press # to enter the menu. -
You will then need to enter the Administation Passcode, and then the new public unlock passcode twice.
And then press # to confirm and exit the menu. -
Press * to exit the Adminstration mode.
Note:
Default Admin Passcode is 666666. The public unlock password must not be a
identical if reversed.
Public PIN code must be 6 digits
Adding User Fob/Cards.
-
Enter administration mode:
When in standby, press # to enter the password entry screen, then type in the Administation Passcode, and then press #. -
Managing the Card/Fobs:
Once in Administration Mode select “Card Manage” by using the 4 and 6 keys to navigate the menus, and then press # to enter the menu. -
You will then need to enter the “Add Card” menu, by pressing 0 and #.
-
You will then need to type in the address of the apartment that the card/fob will be assigned to, and press “#”.
-
You need to only enter 4 digits (Room) address of the monitor the fob is being assigned to.
For example “0001Room.01Ext” you only need to enter “0001”. -
And then present each card/fob(s) in order to add them to that address, when all have been added press “#”
-
Press * to exit the Adminstration mode.
Note: Default Admin Passcode is 666666. The public unlock password must
not be a identical if reversed.
Only 13.56 MHz Fob/Cards are supported.
Contact Details
Elite Security Products UK, Unit 7 Target Park, Shawbank Road, Lakeside,
Redditch, Worcestershire, B98 8YN
Tel: +44(0) 1527 51 51 50
Fax: +44(0) 1527 15 01 43
Email: info@espuk.com
Registered in England, Company Registration Number: 02769392,
VAT Registration: GB614686525
For more product information please visit
www.espuk.com
E&OE – Errors and Omissions Excepted. D23
REV: D23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>