Ingenuity 16927 SimpleComfort Compact Soothing Swing Owner’s Manual

Ingenuity 16927 SimpleComfort Compact Soothing Swing

Product Information

Specifications:

• Model Numbers: 16927 / 17156 / 17255-NU

• Product Name: SimpleComfort TM Compact Soothing Swing –
  Chambray

• Website: ingenuitybaby.com

Product Usage Instructions

Parts List:

• (2) M5 Philips Head Screws
• (2) M5 Nuts
• (1) Left leg assembly

Using the Swing Control Module:

Power Switch: Touch the Power switch to power the Swing Control Module.

Volume Control: Adjust the volume for music and nature sounds.

Swing Timer Select Button and Indicator: Set the swing timer to control the duration of swinging motion.

Nature Sounds/ Music: Choose between nature sounds and music options for soothing ambiance.

Speed Selector Button and Indicator: Select from 6 speed settings and OFF for swing motion.

Important Notes:

Use the USB cord only with a 5 Volt/1 Amp (5 Watts) USB A wall adaptor.

FAQ

Q: How do I adjust the swing speed?

A: Use the Speed Selector Button to choose from 6 speed settings and OFF. The LEDs will indicate the selected speed level.

Q: What power source should I use for the Swing Control Module?

A: Use a 5 Volt/1 Amp (5 Watts) USB A wall adaptor to power the Swing Control Module.

Q: Can I connect external devices to play music through the swing?

A: The swing is equipped with a USB A Cable for connecting compatible devices to play music through the swing.

Q: How do I clean the seat pad of the swing?

A: Refer to the user manual for specific instructions on cleaning and maintaining the seat pad of the swing.

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING

FALL and STRANGULATION HAZARDS: Infants have suffered head injuries falling from seats and have strangled in straps.

• ALWAYS use the restraint system. Adjust to fit snugly.
• STOP using product when infant attempts to climb out (approximately 9 months).
• O NOT use this product once your child can sit up unaided or weighs more than 9 kg/20 lbs. DO NOT use this product if your child weighs less than 3kg/6 lbs.
• Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
• Never let the child sleep in this product.
• DO NOT move or lift this product with the baby inside it. Never lift product using a toy bar as a handle.
• ALWAYS place product on floor. NEVER use this product on an elevated surface (e.g. a table).
• NEVER attach any additional strings or straps to product or toy bar. SUFFOCATION HAZARD: Young infants have limited head and neck control. If the seat is too upright, infant’s head can drop forward and compress the airway.
• ALWAYS keep swing seat fully reclined until infant is at least 4 months old AND can hold up head without help. SUFFOCATION HAZARD: Babies have suffocated when seats tipped over on soft surfaces.
• NEVER use on a bed, sofa, cushion, or other soft surface.

Prevent Serious Injury or Death

• NEVER leave the child unattended.
• To avoid injury ensure that children are kept away when unfolding and folding this product.
• Do not let children play with this product.
• When using the USB cord, only use the one supplied with this swing.
• Check the USB cord and wall adaptor regularly for damage. Do not use if any damage has occurred.
• Use USB cord only with a 5 Volt/1 Amp (5 Watts) USB A wall adaptor.
• The product shall only be used with a transformer for toys.
• The transformer is not a toy.
• This product is only to be connected to equipment bearing either of the following symbols:
• Do not use extension cords.

CAUTION

• This product contains small parts. Adult assembly is required.

IMPORTANT

• The provided USB cord is 183cm in length.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.

Care and Cleaning

• Seat pad and headrest – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, low heat.
• Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame – Wipe the metal frame with soft, clean cloth and mild soap.
• Storage – When putting swing away for storage, always store in a dry location, away from any heat sources, and out of the sun.

No. Nro. N°.

|

Qty. Cant. Qté.

| ENGLISH
---|---|---
Parts List
Description
A| (2)| M5 Philips Head Screws
B| (2)| M5 Nuts
1| (1)| Left leg assembly
2| (1)| Right leg assembly
3| (1)| Bottom Frame Assembly
4| (1)| Control Module Assembly
5| (1)| Swing Arm Assembly
6| (1)| Left recline mechanism
7| (1)| Right recline mechanism
8| (1)| Foot rest Tube
9| (1)| Back rest tube
10| (1)| Seat Pad
11| (1)| Toy bar with toys
12| (1)| Headrest
13| (1)| USB A Cable

not included

• Use USB cord only with a 5 Volt/1 Amp (5 Watts) USB A wall adaptor.

Installation Instruction

Disassemble

Using the Seat Restraint

Using the Recline Function

Rotation of the seat

Using the Swing Control Module

• Touch the Power switch to power the Swing Control Module.
• The Speed Selector function provides 6 speed settings and OFF. The LEDs operate sequentially and in bar graph mode. To start the swing function, touch the button until the flashing LED bar graph displays the desired setting. When you change the speed setting during swing motion, the LED bar graph will flash for five seconds during the speed adjustment. When the swing timer expires, the swing stops and the Speed Selector and Timer LEDs turn OFF.
• Use the Swing Timer Select function to turn OFF the swing automatically. Touch the button to sequence to the desired timer setting of 15, 20, or 30 minutes. The three LEDs above the button indicate the selected time period. If you do not select a timer setting (all LEDs are OFF), the unit uses a default time of 15 minutes for auto-shutoff. To use the swing function after auto-shutoff, either press the Swing Timer Select button or the Speed Selector button.
• Touch the Nature Sounds/Music button to begin music and nature sounds playback. Touch as needed to select the desired nature sound or song. Auto-shutoff occurs after about 20 minutes.
• Touch the Volume Control switch as needed to turn off or adjust the volume for music and nature sounds.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Find us on Facebook and Instagram @ingenuitybaby
Retrouvez-nous sur Facebook et Instagram@ingenuitybaby

References

• Ingenuity™ – Kids2, LLC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>