HAPPY NUTS 23198 Electric Hair Trimmer User Guide

HAPPY NUTS 23198 Electric Hair Trimmer

IMPORTANT SAFID INSTRUCTIONS

WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons

• Use this product only for its intended household use as described in this manual.
• This trimmer is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the trimmer by a person responsible for their safety. Children should be supervised to ensure that they do not play with the trimmer.
• The trimmer is intended to cut hair, and is capable of cutting skin if not used carefully. Do not use attachments not specified by the manufacturer.
• This trimmer is for personal use only. Do not use it on animals.
• Always attach the power cord to the trimmer first, then to power outlet.
• Never use the trimmer if it has a damaged power cord or damaged power adapter, if it is not working properly, if it has been damaged, or after the charging cord has been dropped into water. Contact customer service at info@myhappynuts.com to determine if the product is under warranty.
• Keep the appliance away from direct sunlight and heated surfaces. Do not store at temperatures above 140° F (60°C). Do not place anything heavy on or pinch the appliance.
• To prevent possible damage to the power cord, do not wrap it around the product.
• Keep the air openings free of lint, hair and similar objects.
• Never drop or insert any object into any opening.
• Do not operate or plug in trimmer where aerosol (spray) products are being used or where oxygen is being administered.
• Always check the blade and trimming guard before using the trimmer. Do not use the trimmer if the blade or guard are damaged, as injury may occur.
• Always store the trimmer, attachments and power cord in a moisture-free area. Make sure the cord is disconnected from the trimmer.
• To recharge the battery, only use the supply unit provided with the trimmer.

DANGER
To reduce the risk of electric shock

• If connected to a power outlet, do not reach for the appliance that has fallen into water. Unplug immediately before retrieving appliance.
• Do not place or store the appliance where it can fall or be pulled into a tub or sink. Do not place or drop into water or other liquid.
• Do not use while fully submerged in water.
• Always unplug the appliance from the electrical outlet immediately after charging. Unplug this appliance before cleaning.

BATTERY
This appliance contains non-replaceable batteries & materials that are hazardous to the environment. Battery must be be disposed of separately from household waste.

• Unplug and operate the trimmer until the battery runs out.
• Remove the screw at the base of the backside of the trimmer.
• Remove the battery and PCB (Protection Circuit Board) for disposal.
• Dispose of the battery safely according to your local environmental laws and guidelines.

For assistance, email us at info@myhappynuts.com for additional support. The Lumberjack is designed in California and assembled in China. Distributed by Suit Up Brands LLC, Hermosa Beach, CA 90254. © 2023 Suit Up Brands LLC. All rights reserved. Happy Nuts and The Lumberjack are trademarks of Suit Up Brands LLC, registered in the U.S. For household use only. When using an electric product, always follow basic safety precautions. Read all instructions before using The Lumberjack. Save these instructions for future reference of the battery safely according to your local environmental laws and guidelines.

QUICK START GUIDE

• STEP 1
  Choose and attach your guard, if desired, or the nose head.

• STEP 2
  Press the power button to turn on the trimmer.

• STEP 3
  For the trim head, slide trimmer blade across skin to remove hair, repeat as necessary. For the nose trim head, rotate inside your ear or nose to remove hair, repeat as necessary.

• STEP 4
  Rinse the blade under running water and wipe with a soft cloth. Store in a dry place.

USING YOUR GUARDS

Choose a guard for your preferred hair length and slide the guard onto the trimming head. Each guard has three cutting lengths. Adjust the guards by sliding the guard up or down the trimming head.

CHARGING

Make sure the trimmer is off and insert the USB-C charging cord into the bottom of the trimmer then insert into wall AC Outlet. When fully charged, the indicator light around the powder button changes from red to green. The Lumberjack takes up to 2 hours to fully charge and lasts up to 90 minutes on a full charge.

DISCLAIMER: Do not overcharge. Overcharging can shorten the life of the battery over time. Only use the power cord provided.

REPLACING HEADS

The trim head: tackles thick, coarse body hair. The nose head: trims hair inside the nose and ears.

CAUTION: Make sure the trimmer is off. Remove either head by pulling the head off the body of the trimmer. Insert the desired head into the trimmer body. You will hear a click when the blade is properly inserted.
We recommend replacing your blade every 2 to 4 months depending on your level of usage.

CLEANING

• STEP 1
  Use the cleaning brush to remove hair from the blade.

• STEP 2
  Rinse the blade under running water and wipe with a soft cloth.

• STEP 3
  Store in a dry place.

CAUTION: Always ensure trimmer is turned off and unplugged before cleaning. Clean after each use.

SCAN TO ACTIVATE AND EXTEND WARRANTY AND GET 10% OFF YOUR NEXT ORDER.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>