STREAMLINE CCTV-POLE-KIT0003-051 CCTV Wireless Bullet Camera and Widescreen Monitor Kit Instruction Manual

INSTRUCTION MANUAL
STREAMVAC TM
Codes:
CCTV-POLE-KIT0003-051
CCTV-POLE-KIT0003-032 INSTR-CCTV-POLE-KIT0003

Why STEAMLINE®?

Flexibility

• STREAMLINE® systems can be built according to customers’ exact requirements
• For non-standard systems, the user’s needs or specifications are listened to and turned into reality.

Quality

• Whilst price is important, quality is remembered long after price is forgotten
• We insist on sourcing brand name products from around the world, only from a reputable quality, and bring them together under the STREAMLINE® name
• All STREAMLINE® products carry a full one-year warranty, according to the manufacturers’ standard terms and conditions of sale.

Service

• We have an in-house technical helpline able to answer most of your questions relating to the capabilities and functionalities of all STREAMLINE® products
• If we get it wrong, we will put it right. If you are sent a wrong item, we will immediately attend to sending you the correct item and arrange a collection of the wrong item  without any quibbles
• STREAMLINE® is backed by a comprehensive range of massive stocks providing you with a ‘one-stop-shop for all your requirements.

STREAMLINE® Warranty

The warranty on all Machines and Equipment is for 1 year (12-months) from the RECORDED DATE OF PURCHASE.
THIS WARRANTY EXCLUDES NORMAL MAINTENANCE ITEMS, including but not limited to HOSES, FILTERS, O-RINGS, DIAPHRAGMS, VALVES, GASKETS, CARBON BRUSHES, and damage to motors and other components as a result of failure to replace normal maintenance items. THIS LIST IS NOT EXHAUSTIVE.
If STREAMLINE® receives notice of such defects during the warranty period, STREAMLINE® will either, at its opinion, repair or replace components that prove to be defective.
Replacement parts will only be supplied under warranty, upon the inspection and approval of the defective parts by STREAMLINE®.
Should it be necessary to supply replacement parts before the opportunity to inspect, these will be charged at current prices and a credit will only be issued upon subsequent inspection and warranty approval by STREAMLINE®.
The customer is responsible for the cost of the return of the defective part. If the warranty is approved, STREAMLINE® will pay for the cost of the repaired or replacement part.
This warranty excludes the following conditions and circumstances which are at the discretion of STREAMLINE®:
Wear and tear, misuse, abuse improper maintenance, frost damage, the use of chemicals other than those supplied or approved by STREAMLINE®, improper installation or repair, unauthorized modification, incidental or consequential costs, loss or damage, service, labor or third party charges, the cost of returning defective parts to STREAMLINE®.
This warranty constitutes the exclusive remedy of any purchaser of a STREAMLINE® unit and is in lieu of all other warranties, express or implied, including without limitation any implied warranty of merchantability or fitness for use, to the fullest extent permitted by law. In no event shall any implied warranty of merchantability or fitness for use exceed the term of the applicable warranty stated above and STREAMLINE® shall have no other obligation or liability.

Important
Unfortunately, these rights cannot be transferred to a third party.

• Do not use or store the camera or monitor in high temperature or high humidity or damp environment.
• Avoid direct sunlight for long periods.
• Do not use an SD card larger than 32GB
• Insert and remove the SD card only once the power of the monitor is switched off.
• When inserting the SD card, please make sure that the insertion direction is correct. Failure to do so will damage the card slot. (See icon on the rear of the monitor)
• Do not attempt to remove the battery of either the camera or monitor.

Buttons & Interface

The possible reason for the Monitor not powering up is that the battery is depleted. Plug the charging wire into the USB port on the monitor and connect it to a mains voltage supply.
The battery charger supplied is for Monitor use only. Do not leave the charger in a humid place.
Unplug the charger after use.
Before using the Monitor for the first time, charge it for between 6 – 10 hours.
The new battery will reach its best performance after charging and discharging several times,
If the camera is not used for long periods, it is recommended to charge the monitor every 2-3 months.

Bullet Camera
Ensure that the camera battery is fully charged prior to operation. Once fully charged the battery will have a 1.5 hour working time.

Charging
Charge the camera battery, for approximately 1½ hours, using the mains charger supplied with the kit. Whilst charging, the red indicator LED, in the front of the camera, will illuminate. When fully charged, the red indicator LED will switch off. Do not leave the camera on charge for a long period of time after the red LED has switched off.

Operation
Press and hold the button, on the rear of the camera, to turn the camera on. The reason for the camera possibly not switching on, is that the battery is depleted.

Enhanced brightness
When switched on, press the button once to give enhanced brightness, and again to turn the LED lights off. The camera will continue to function in this mode and the battery charge will be extended.
Press and hold the button to switch the camera off.

Camera Specification:

Monitor Specification

Wireless Receiving Wireless freq.
1of 6 groups 2.4GHz–8 channels:| CH1: 2414MHz; CH2: 2432MHz; CH3: 2450MHz;
CH4: 2468MHz.CH5: 2490MHz; CH6: 2510MHz;
CH7: 2390MHz; CH8: 2370MHz
Within 5.8G-A 8 channels:| CH1: 5865MHz; CH2: 5845MHz; CH3: 5825MHz;
CH4: 5805MHz. CH5: 5785MHz; CH6: 5765MHz;
CH7: 5745MHz; CH8: 5725MHz
Beyond 5.8G-B 8 channels:| CH1: 5705MHz; CH2: 5685MHz; CH3: 5665MHz;
CH4: 5645MHz. CH5: 5885MHz; CH6: 5905MHz;
CH7: 5925MHz; CH8: 5945MHz
Within 5.8G-C 8 channels:| CH1: 5733MHz; CH2: 5752MHz; CH3: 5771MHz;
CH4: 5790MHz. CH5: 5809MHz; CH6: 5828MHz;
CH7: 5847MHz; CH8: 5866MHz
Within 5.8G-D 7channels for FPV:| CH1: 5740MHz; CH2: 5760MHz; CH3: 5780MHz;
CH4: 5800MHz. CH5: 5820MHz; CH6: 5840MHz;
CH7: 5860MHz; CH8: SPI
Beyond 5.8G-E 7 channels for FPV:| CH1: 5705MHz; CH2: 5685MHz; CH3: 5665MHz;
CH4: 5645MHz. CH5: 5885MHz; CH6: 5905MHz;
CH7: 5925MHz; CH8: SPI
Items| Value
---|---
Earphone Output Left:| 20MW+ right 20mW [16O](suit to largest
Photo Format:| JPG/JPEG
Storage:| External SD card TF card  1GB-32GB optional
32 GB Recording time:| 10-32 hours
1GB Photos:| 15625pcs
Operating system PC:| Windows & Mac OS
Power Port:| USB 2.0
Items| Value
---|---
Earphone Output Left:| 20MW+ right 20mW [16O](suit to largest
Photo Format:| JPG/JPEG
Storage:| External SD card TF card  1GB-32GB optional
32 GB Recording time:| 10-32 hours
1GB Photos:| 15625pcs
Operating system PC:| Windows & Mac OS
Power Port:| USB 2.0
Language:|  Multiple
Voltage:|  DC 5V
Current (receiving mode)|  660MA
Current (recording mode)|  680MA
Current recording with off-screen mode|  340MA
AC adapter:|  DC 5V  2A
Built-in battery:|  Li-battery 3200Mah
Standby time:| (Wireless record)
(Wired record)
≥9.5 hours(off-screen);  ≥5hours on-screen
≥12 hours(off-screen); ≥6hours on-screen
*LED camera not included
Size (L x W x H)| 131mm x 86mm x 18mm
Weight(g)|  205g

Basic Monitor Operation

1. Power On/Off:
   Press and hold to switch the power on – press and hold to switch the power off.

2. Working mode switch
   (switch located on the side of the camera – see rear for icons)
   When switched to Monitor will take photos and record videos
   When switched to Monitor will display recorded photos and videos When switched to Monitor is in the state of motion detection.

3. Raise the monitor antennae to improve wireless connection with the bullet camera.

4. SD card
   If you wish to use the video function, insert an SD card prior to switching the monitor on. If no SD card is inserted, the monitor can be used for viewing only. The screen will show a symbol of an SD card when inserted.

Taking a photo and video

Switch the Monitor on, and select working mode. Switch the bullet came on and wait for them to connect.

1. Taking a Photo
   When is displayed, press once, the symbol will display on the screen and a still, image will be captured

2. Video Recording
   When is displayed, press and hold for 3 seconds and the monitor will begin recording, (the screen will display “REC”). Press once to pause the video,(screen will display ), and press again to continue recording. Press to end the recording, It will save automatically exit.

3. Mute
   When is displayed, press to mute the sound? The screen displays “MUTE”.
   Press again to recover sound.

Viewing Photos and Videos

Select the central position of the switch on the side of the monitor to view photos and videos.
Press to select either “Photo” or “Video”.

Viewing Videos:

1. When “Video” is selected, press to display the list of videos that have been recorded
2. Press to scrolls through the list and presses to play the selected video.
3. Whilst the video is being viewed, press and hold to fast forward; press and hold to rewind. (Press to adjust volume)
4. Press to pause; press again to release pause.
5. Press and exit the video and return to the video list.
6. Press again to return to the photo and video option.

Viewing Photos

1. When “photo” is selected, press to view the list of photos that have been recorded.
2. Press to scroll through the list and press to display the selected photo.
3. Press to return to the photo list.

Deleting Photos & Videos

1. Press to select the desired video/photo.
2. Press to open the options dialogue. M
3. Press to select the desired option
4. Press to confirm.

Additional Information & Motion Detection

1. Switch the monitor on, and select the mode on the side switch.
2. Press and hold for 3 seconds to enter the motion detect recording. When moving objects are detected, the monitor will automatically begin to record, and the screen will show “REC”. After 10 seconds, if no movement is detected, the monitor will automatically pause recording, until further movement is detected, when it will continue to record the video. To end motion detect recording, press it will automatically save the video.

Function Settings

Switch the monitor on, with the mode or displaying, press to enter the function mode. Press to select “Function”, then press to enter into the function menu.

1. Channel Setting: Press / to select “Channel Setting”, and then press to enter

1. Auto Switch Press to select “Auto Switch”, and press to enter.
   Press to select channel and press to turn it off/on.
   Press to exit.

2. Auto Switch Press to select “Auto Switch”, and press to enter. Press to select “Off” / “On”, then press to confirm and exit.

3. Dwell Time Press to select “Dwell Time” and press to enter Press to adjust dwell time. Then press to confirm and exit.

Recorder Resolution:
Press to select “Recorder Resolution” and press to enter. Press to select “720X576” / “720X480”. Press to confirm and exit.

3. Frame Rate
Press to select “Frame Rate” and press to enter.
Press to select “30 FPS”/“25 FPS”, and press to confirm & exit.

4. Video Segment Sizes
Press to select “Video Segment Sizes”, then press to enter. Press to select “10 MIN”/“30MIN”/“60 MIN”. Press to confirm & exit.

5. Overwrite
Press to select “Overwrite”, and press to enter. Press to select “Off”/ “On”, and press to confirm & exit. If “Overwrite” is on, DVR will cycle record, and save the latest video.

6. Time Stamp
Press to select “Time Stamp”, and press to enter.
Press to select “Off”/ “On”, and press to confirm & exit. If it’s on, the video will be saved in synchronous time.

7. Information Display
Press to select “Information Display”, and press to enter. Press to select “Off”/ “On”, and press to confirm & exit. If it’s on, the screen will display information of working frequency, channel, audio state, date & time, etc. If you select “Off”, all the information will not be displayed.

8. Video Setting
Press to select “Video Setting”, and press to enter.
Press to select “Brightness” or “Contrast”; then press to enter; then press to adjust brightness or contrast. Press to exit

Power DVR on, working mode switched to / press to enter into function & system setting.
Press to select “System”; then press to enter into the system menu.

1. Date & Time 
   Press to select “Date Time”, and press to enter. Press again to move the cursor, and press to adjust the date & time. Press to exit.

2. Language
   Press to select “Language”, and press to enter. Press to choose your language. And press to confirm and exit.

3. AV Out
   Press to choose “AV Out”, and press to enter. Press to choose “PAL/NTSC”
   Press to confirm the video displayed on the TV screen. Pull out the AV cable, the video will back to the DVR screen.

4. Format
   Press to select “Format”, and press c to enter. Press to choose “Yes”. Press to confirm & exit.

5. Power Save
   Press to select “Power Saver”, and press to enter:

1. Auto LCD Off
   Press to select “Auto LCD Off”, and press to enter. Press to select “1 MIN”/ “5 MIN”/ “Off”, and press to confirm & exit. If turn on “Auto LCD Off”, the LCD  screen will automatically shut off when the set time is due. Press any key to recover the screen display.

2. Auto Power Off
   Press to selects “Auto Power Off”, and press to enter.
   Press to select “5 MIN” / “10 MIN” / “Off”, and press to confirm & exit. If turn on “Auto
   Power Off”, DVR will automatically shut off when the set time is due.

3. Firmware Update:
   Press to select “Firmware Update”, and press to enter. Press to select
   “Yes” and press to start the update. Please remember to save the update file “zburnT_C11.run.elf” at the root directory of the SD card.
   

4. Default Setup
   Press to select “Default Setup” and press to enter.
   Press to select “Yes” and press to confirm. Press  to exit.

5. Memory Info
   Press to select “Memory Info”, and press to view the capacity of the SD card.
   Press to exit.

6. Version
   Press to select “Version” and press to view version information.
   Press to exit.
   

7. Display Mode
   Press to choose “Display Mode”. Press to chooses “16:9/4:3”. Then press to confirm. Press to exit.

Notes

Hamilton House, 8 Fairfax Road,
Heathfield Industrial Estate,
Newton Abbot
Devon, TQ12 6UD
United Kingdom
Telephone: +44 (0) 1626 830 830
Email: sales@streamline.systems
Visit  www.streamline.systems

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>