Reddeco BOBBY W4O Wired Ball Light User Guide
- June 17, 2024
- Reddeco
Table of Contents
Reddeco BOBBY W4O Wired Ball Light
Contents
- Lamp BOBBY W40/ BOBBY W50 / BOBBY W60
- Operating instructions
Before using this device for the first time, please read these instructions carefully and keep them in a safe place for future reference.
Safety Instructions
Make sure that the installation of your lighting fixtures complies with the regulations in force. In case of doubt, we advise you to call in a professional.
SAFETY WARNING : When assembling and using the luminaire, the power cable must not be pulled at the foot of the luminaire and must not be adjusted along the structure of the luminaire. To avoid hazards when adjusting the position of the luminaire, the power cable should be released at the joints so that it can be bent without straining the cable. Do not place near heat sources over 60°C. Handle the product with care. A blow, a shock, or a fall, even from a low height, can damage it. Be sure to use the product as described in the manual. Incorrect use may damage the product or its environment. This product contains light sources of energy efficiency class G.
- Replacement instructions for replaceable components The cable or flexible outer cord of this light cannot be replaced; if the cable is damaged, the light must be destroyed. Do not use a higher wattage bulb than indicated on the marking on the product.
Installation instructions
Instructions for use
This product is designed for indoor and outdoor use. The light colour is cool white. To turn on the lamp, plug the power connector into an electrical outlet. To turn off the lamp, unplug the power supply. When not in use, store the product carefully in a cool, dry place in its original packaging.
Maintenance instructions
Always unplug the fixture before cleaning it. Clean the exterior parts only with a soft cloth. Check periodically throughout the year, especially after the winter season. Never clean with detergent and/or abrasive cloth.
Troubleshooting and Technical Specifications
Never open the unit or you will lose all warranty.
Technical specifications
IP44 220-240V Bulb E27 LED 10W Cable length: 2m40 810 lumens 6000K
Design in France Batimex SAS
2 years warranty
- Pour toute question / for any request : support@batimex-import.fr