SEALEY MS081 Motorcycle Helmet and Gear Tidy Instruction Manual
- June 4, 2024
- SEALEY
Table of Contents
SEALEY MS081 Motorcycle Helmet and Gear Tidy
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT IS CORRECTLY
AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP
THESE INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
- DO NOT locate this tidy in such a position as to create the risk of injury from contact with the head or any other part of the body.
- DO NOT overload this tidy; it should only be used for the designed purpose.
- DO NOT locate in a position where items could fall from the tidy owing to accidental contact.
- Ensure that the tidy is fi rmly fi xed to the wall using suitable wall fi xings.
- Ensure that, when installed, it can be accessed without over-reaching or over-balancing.
SPECIFICATION
- Width x Depth: ……………………………………..490mm x 350mm
INSTALLATION
- Choose a suitable location and, ensuring that the tidy is level, mark the position for the four holes on the wall.
- Select suitable wall fi xings and drill the wall on the marks made previously.
- Use the selected wall fi xings to secure the tidy to the wall.
- Hang the supplementary shelves from the main shelf if required.
CARE
- Clean with a soft, damp cloth. DO NOT use abrasive or solvent cleaners.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling center and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: The guarantee is 12 months from purchase date, proof of which
is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk
www.sealey.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>