Imou L11 Smart Robot Vacuum Cleaner User Guide

Imou L11 Smart Robot Vacuum Cleaner

Instructions Before Cleaning

• Remove plugs and power cords that could entangle the robot.
• Fold the carpet tasseled edges under to improve the cleaning efficiency.
• Put the weight scales out of the area to be cleaned.
• Do not use the robot on vet surfaces or Put away the mops or pieces of paper on the floor.

Preparation Before Using

1. Remove Protective Materials
   Place the robot on a flat surface and then remove all protective materials on the robot.

2. Charging Dock Placement
   Place the charging dock on a flat ground against the wall.
   Keep the area around the charging dock clear of objects.
   If the robot fails to recharge, stay away from strong sunlight and devices that emit infrared light, such as TVs, air conditioners, microwave ovens, and try recharging again after changing rooms.

3. Charge the Robot
   Press and hold for 3s to power on the robot. Press to send the robot back to the charging dock to charge. The robot will enter standby mode when it is fully charged.

   • For the first-time cleaning, please ensure that the robot is fully charged.
   • The robot automatically returns to the dock to charge when its battery is low.
     It resumes cleaning from the last cleaning spot after the robot has enough power.

Cleaning System

1. Start
   Press to start Auto-cleaning.
   Press and hold for 3s to start Spot cleaning.

2. Pause
   During cleaning, press or to pause cleaning.
   The robot enters sleep after it is paused for 60 minutes. Press or to wake up the robot.

3. Automatically/ Manually Recharge
   Auto-recharge: Low battery during cleaning./ Cleaning completed.
   During cleaning, press ) or to pause cleaning. Press again, the robot returns to the charging dock and recharge.

4. Power Off
   When the robot paused, press and hold for 3s to power it off. The LED indicator fiashes white fast to off.
   During charging, the robot can not be powered off or enters the sleep.

Mopping

1. Uninstall the Water Tank
   Press the release button on the dust box to remove the water tank.

2. Install the Mop Bracket

3. Add Water
   Purified water is recommended. To prevent corrosion on metal components, please do not use detergent.

4. Mop
   Press to start Auto mopping. Press for 3s to start Spot mopping.

Connect to lmou Life App

Before setting up the device, please make sure that the 2A GHz band Wi-Fi is enabled on your router.

• Make sure that the router encryption method is WPA2 or WPA2/WPA3.
• Confirm that the Wi-Fi password does not include “and space.

Set Up the Device
Scan the QR code below or search for”lmou Life”in the app store to download and install the app. Open lmou Life app, tap+ on the right upper corner of the page to add your device.

Device adding processes vary between different versions of the app. Please follow the instructions in the app that you are using.

Reset Wi-Fi and Reset the Device
Remove the robot from the charging dock, press both and for Ss until the indicator fiashes white fast to off.
When the device is powered off, press for 3s to power it on. When you hear the prompt sound, follow the instructions on the app to add the device.

Features
You can view map, set no-go areas, configure rooms, adjust suction power and water volume, firmware updates and more in the lmou Life app. Use the app to enjoy all available features .

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>