KLARSTEIN 10034215 Electric Meat Grinder User Manual

: June 17, 2024
: Klarstein

Table of Contents

KLARSTEIN 10034215 Electric Meat Grinder
Product Information
Product Usage Instructions
Cleaning and Maintenance
FAQ
TECHNICAL DATA
SAFETY INSTRUCTIONS
BEFORE FIRST USE
PRODUCT OVERVIEW
ASSEMBLY AND OPERATION
Mincing meat
Making sausages
CLEANING AND CARE
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KLARSTEIN 10034215 Electric Meat Grinder

Product Information

Specifications

Item Number: 10034215, 10035233
Power Supply: 220-240V ~ 50/60Hz
Power: 1800W
Dimensions (WxDxH): 410x210x426 mm

Product Usage Instructions

Assembly and Operation

Hold the head and insert it into the connection. Ensure the head is slightly inclined while inserting.
Turn the head clockwise until it is firmly seated.
Insert the snail with the long end into the head and turn it slightly until seated in the motor housing.
Place the cutter blade on the snail shaft with the blade facing forward.
Place the desired perforated disc on the cutting blade and tighten the fixing ring securely but not too tightly.

Faschieren (Minced Meat)

Use the food pusher to push meat into the funnel, never by hand.

Cleaning and Maintenance

Ensure the device is switched off and unplugged before cleaning.
Disassemble the parts carefully for cleaning after each use.
Clean all components thoroughly with warm soapy water and dry completely before reassembling.

Disposal Considerations

Follow local regulations for proper disposal of the product at the end of its life cycle.

FAQ

Q: Can I wash the components in a dishwasher?
A: It is recommended to clean all components by hand with warm soapy water to ensure the longevity of the product.
Q: How do I access the latest user manual?
A: Scan the provided QR code to access the latest user manual and additional product information.

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damage. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

Item number	10034215, 10035233
Power supply	220-240 V ~ 50/60 Hz
Power	1800 W
Dimensions (WxDxH)	410x210x426 mm

SAFETY INSTRUCTIONS

This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and/or lack of experience and knowledge, provided that they have been instructed in the use of the device by a responsible person who understands the associated risks.
The device is not intended for commercial use, but only for household and similar environments. This includes kitchens in offices, farms, hotels, motels and Bed & Breakfasts.
Disconnect the plug before assembling or disassembling the appliance.
Only use the appliance under supervision when children are present.
When moving the unit, hold it by the housing with both hands. Never hold it by the hopper plate or any other part of the unit.
When using the Kibbeh attachment (for minced meat rolls), do not attach a cutter or perforated discs.
Do not grind hard food such as bones or nuts in the miner.
Do not crush fibrous foods such as ginger in the miner.
Do not allow the mincer to run for more than 10 minutes at a time. Let it cool for 10 minutes before using it again.
Wait 30 seconds after finishing the current process before using the reverse switch.
Doing so may damage the unit.
To avoid blockages, do not press the meat into the funnel under excessive pressure.
Never attempt to replace or repair permanently installed parts of the appliance yourself.

WARNING
Risk of injury! Never push the meat into the funnel by hand. Always use a food pusher.

BEFORE FIRST USE

Before use, check the voltage on the device badge. Connect the device only to sockets that correspond to the voltage of the device.
Wash all accessories with warm water and a little detergent.
Before plugging the appliance into a wall outlet, make sure that the appliance is switched off.

PRODUCT OVERVIEW

ASSEMBLY AND OPERATION

Hold the head and insert it into the connection. When inserting, make sure that the head is slightly inclined (see Figure 1). When you have inserted the head, turn it clockwise until it is firmly seated (see Figure 2).
First, insert the snail with the long end into the head and turn it slightly until it is seated in the motor housing (see Fig. 3). Place the cutter blade on the snail shaft as shown with the blade facing forward (see Figure 4). If the knife is not mounted correctly, the meat will not be minced.

KLARSTEIN-10034215-Electric-Meat-Grinder-FIG-4

Place the desired perforated disc on the cutting blade (see Fig. 5). Hold the perforated disc with one hand while tightening the fixing ring with the other hand (see picture 6). Do not tighten the fixing ring too tightly.

KLARSTEIN-10034215-Electric-Meat-Grinder-FIG-5

Mount the hopper plate on the head. Place the unit on a solid worktop. The air outlet on the floor and on the side of the motor housing should be kept free and not blocked.

KLARSTEIN-10034215-Electric-Meat-Grinder-FIG-6

Mincing meat

WARNING
Risk of injury! Never push the meat into the funnel by hand. Always use a food pusher.
Cut all food into pieces. We recommend that you use tendonless and boneless meat and cut it to a size of approximately 2 x 2 x 6 cm so that it fits easily into the funnel opening.

Press the HIGH or LOW button to run the unit at high speed (HIGH) or low speed (LOW).
Push the food into the funnel with the food pusher.
After use, press STOP to stop the appliance. Remove meat residues by pressing the REVERSE button. Then pull the plug out of the socket.

Reverse function
If a blockage occurs, press and hold the REVERSE button for 3-6 seconds. Then release the button. Unplug the appliance and remove the food from the head of the appliance.
Making Kibbeh (minced meat rolls)

Ingredients

Stuffing:

Mutton 100 g Olive oil 1 1/2 tbsp Onion 1 1/2 tbsp Flour 1 1/2 tbsp Spices to taste Salt to taste

| For the rolls:

Lean meat 450 g Flour 150-200 g Spices to taste Nutmeg 1 tsp Paprika to taste Pepper to taste

Chop the meat three times for the filling and three times for the rolls and mix the

minced meat with the remaining ingredients in a bowl.

Before attaching the Kibbeh attachments, remove the perforated disc and the cutting blade.
Place the Kibbeh attachments together on the snail shaft.
Tighten the fastening ring. Do not overtighten it. Put the minced meat mixture for the rolls into the funnel and make minced meat rolls.

KLARSTEIN-10034215-Electric-Meat-Grinder-FIG-7

Fill the finished minced meat rolls with the minced meat filling as shown below and fry or deep-fry them.

KLARSTEIN-10034215-Electric-Meat-Grinder-FIG-8

Making sausages

Place the cutting knife, one of the perforated discs (fine, medium, coarse) and the corresponding funnel (fine, medium, coarse) on the screw shaft and screw the fastening ring tight.

KLARSTEIN-10034215-Electric-Meat-Grinder-FIG-9

Thread the sausage skin onto the sausage filling tube and knot the end. Make sure that the sausage casing is loosely filled, as the sausage expands during frying or cooking and the casing can tear open. Press the sausage together at the end with your fingers and turn it once or twice around its axis.

DISASSEMBLY

Make sure that the engine is completely stopped.
Disconnect the plug from the socket.
Disassemble the parts by performing steps 1-6 in reverse order (see below).

KLARSTEIN-10034215-Electric-Meat-Grinder-FIG-10

Note: It is easier to remove the perforated disc by inserting a screwdriver between the cutting blade and the perforated disc to loosen it.

CLEANING AND CARE

Switch off the device and unplug the plug from the socket.
Allow the appliance to cool down completely.
Clean the housing with a damp cloth using a mild detergent. Never clean the housing under running water and never put it in water.
Do not clean the unit with caustic or abrasive cleaning agents.
The attachments are not dishwasher safe. These parts should only be cleaned in warm water with a small amount of detergent.
When you have finished cleaning, attach the cable to the cable holder on the back and store the unit in a dry, clean place where children have no access.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it under the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.