PWAYTEK PW-HT248W Type C Wireless HDMI Transmitter and Receiver User Manual
- June 17, 2024
- PWAYTEK
Table of Contents
PWAYTEK PW-HT248W Type C Wireless HDMI Transmitter and Receiver User Manual
Safety instruction
- Please do not disassemble this product by yourself because it doesn’t including DIY function;
- Please keep the product away from water in case damaged, because it is not waterproof design;
- Please use dry cloth when clean the product surface;
- Please do not use this product in environments that are too humid or too hot;
- Please avoid contact with corrosive substances;
- When there is damage or other physical damage to the product, please stop using and contact with customer service to get support.
Package list
-
Wireless Transmitter 1 pcs
-
Wireless Receiver 1 pcs
-
User Manual 1 pcs
-
Warranty Card 1 pcs
-
USB-A To Type-C Cable 2 pcs* TYPE-C version 1 pcs
Connection Steps
Install RX
- Connect the receiver HDMI to the TV
- Power up the receiver by USB cable
- Put the receiver where it can be seen
Install TX
- Connect the transmitter HDMI/TYPE-C to the signal source (laptop)
- Power up the transmitter by the USB cable
Status Display
- After connecting and powering on, the LED light will flash quickly, and it will cast the screen after a few seconds
Laptop
Type-C Version No need external power supplies
Matching setting
When the Wireless HDMI Extender cannot match, please do the following.
-
Receiver
Press and hold the [Reset] button on the RX for 2 seconds, and [Ready to Pair] will appear on the screen. -
Transmitter
Press the [Pair] button on the TX for 5 seconds, stop press after the LED light turns off, and then the light will flash. -
Matching state
They will complete the match in a few seconds and then work normally.
Interface specification
Transmitter:
TYPE-C
HDMI
Receiver:
HDMI
| Port name | Description |
|---|---|
| Mirror / Pairing | (1) Short press the button to stop or re-mirror(2) Hold down |
for 5 seconds to pair with the receiver
Transmitter Reset| Press and hold for 5 seconds to restore the original
Settings of the transmitter
Receiver Reset| (1) Long press for 2 seconds: open the pairing mode of the
receiver for pairing with the transmitter.
Specifications
Parameter Description
Video| Standards| HDMI 1.3
Resolution| 19201080@60Hz，3D
Maximum Pixel Clock| 165MHz
Maximum Data Rate| 6.75Gbps
Connector| HDMI-A/TYPE-C
Impedance| 100Ω
Recommended Transmission Distance| ≤30M,Best signal within 10m；Possible lag at
10-30m
Frequency Band| 5G
Other| Power Supply| DC 5V
Power Dissipation| MAX 2W
Temperature| Operating: -5℃ ~ +70℃
Humidity| Operating: 5% ~ 90%
Dimension| 6541*19mm
The Warranty| 1 year free warranty
Warranty
Thank you for using this product. In order to protect your rights, please read
the following protection terms carefully:
We provide 1 year warranty and lifetime maintenance after-sales service for
this product. During the one-year warranty period from the time of purchase,
the company will provide customers with free maintenance services due to
hardware failures caused by the quality of the product itself.
Please keep the user manual in a place where safety and easy to find so that you can read it immediately when needed.
Questions or Concerns?
Contact us
Shenzhen Pinwei Technology Co.,ltd.
Email: [email protected]
Official Website :www.pwaytek.com
Address: 6/Floor, No.21, Tianxi Road, Longhua District, Shenzhen,
Guangdong, China. ZIP:51