WISEQ Hero Wireless Bluetooth Headphone Kids Instruction Manual
- June 4, 2024
- WISEQ
Table of Contents
INSTRUCTION MANUAL
KEY FUNCTIONS
LED INDICATOR
READY TO CONNECT DEVICE | LED INDICATOR FLASHES RED & BLUE |
---|---|
STAND-BY MODE | LED INDICATOR IS CONSTANT BLUE |
PLAYING MUSIC | LED INDICATOR FLASHES BLUE |
INCOMING CALL | LED INDICATOR FLASHES RAPIDLY BLUE |
LOW BATTERY | LED INDICATOR FLASHES RAPIDLY RED |
CHARGING MODE | LED INDICATOR IS CONSTANT RED WHEN THE BATTERY IS LOW, THE LED |
INDICATOR
WILL SWITCH OFF ONCE THE HEADPHONE IS FULLY CHARGED
POWER ON
Press and hold the power button for two seconds. The LED indicator will flash
blue and red. This indicates that the headphone is ready to connect.
CONNECTING WITH BLUETOOTH
Once the device has been switched on, the LED indicator will flash red and
blue. The headphone is then ready to connect with any Bluetooth device. Open
Bluetooth in the
settings of the audio device and select: ‘WISEQ HERO’ Your device will connect
with the headphone.
POWER OFF
When the headphone needs to be switched off, press and hold the power button
for two seconds. The LED indicator will flash red and the device will be
switched off.
FAST CHARGING
By charging the headphone with the USB-C cable (provided in the package), the
headphone is suitable for high-speed charging. 10 minuteof s charging equals 1
hour of use. The headphone is fully charged within 90 minutes.
ADDITIONAL FEATURES
BATTERY DISPLAY
When the headphone is connected with Bluetooth, the audio device usually
indicates the battery status. This way you will always know when to charge the
headphone.
In addition, the LED indicator on the headphones flashes red when the
headphone is on low battery.
DUAL SHARE MODE
Thanks to the integrated Dual Share mode, 2 headphones can be connected to
each other by using the audio cable (provided in the package). This allows
children to listen to music and watch videos together. The Dual Share mode can
be used with Bluetooth- or cable connection:
- Activate Dual Share mode when listening wireless on a Bluetooth connection, by plugging the audio cable in the left audio input and connecting the other side of the cable in the 2nd headphone.
- Activate Dual Share mode when listening wired through a cable connection with the audio device, by plugging an extra audio cable in the left- or right audio input and connecting the other side of the cable in the 2nd headphone.
CONNECTIVITY
The headphone can be connected to any smart device. This applies for laptops,
smartphones, game consoles, smartwatches and tablets. The headphone is
compatible with any operating system such as Windows, iOS and Android.
FLEXIBLE HEADBAND
The headband of the headphone is made of flexible materials with high strain
resistance. This means the headphone is flexible and will return to it’s
original fit when used properly.
MULTI-FUNCTIONAL BUTTONS
ADJUST VOLUME: Press the ‘+’ or the ‘-’ button once to adjust the volume as
suited.
MUSIC SELECTION: Hold ‘>’ to play the next song. Hold ‘<’ to play the
previous song.
MULTI-FUNCTION KEY TO PLAY / PAUSE / OR MAKE PHONE CALL
PAUSE: Press the power button once to pause the music. PLAY: Press the power
button once to pause the music. ACCEPT INCOMING CALL: Press the power button
to answer an incoming phone call.
END PHONE CALL: Press the power button again to end the phone call. The music
will resume automatically.
AUTOMATICALLY CONNECT WITH THE DEVICE
When switched on, the headphone will automatically connect to the last paired
audio device, this only works when the device is within range of the headphone
and transmitting Bluetooth.
3D OVERVIEW OF OUR HERO
PACKAGING CONTENT
- 1x BLUETOOTH
- 1x USB-C CHARGING
- 1x AUDIO CABLE
- 1x MANUAL
PRODUCT SPECIFICATIONS
BLUETOOTH VERSION | 5.0 |
---|---|
TRANSMISSION DIS- DANCE | 20 METERS (UP TO 100 METERS IN OPEN SPACE |
PLAYTIME | 30 HOURS |
MAX. VOLUME | 93dB ± 3dB |
SPEAKER DIMENSION | 30mm |
BLUETOOTH PROTOCOL | A2DP / AVRCP / SMP / HFP |
IMPEDANCE | 320 ± 15% |
FREQ. RESPONSE | 20Hz – 20,000HZ |
CHARGING VOLT. | 5V |
MAXIMUM INPUT | 10 mW |
BATTERY | 500 mAh |
IMPORTANT SAFETY INFORMATION
This product complies with all safety standards and regulations.
Do not open/repair the device or expose to moisture/liquids/cold/heat.
The product is made of high-quality materials and parts that can be recycled
and reused.
This symbol means that the product contains batteries that comply with EU
Directive 2013/56/EU, which cannot be disposed of with normal household waste.
To avoid possible hearing damage, do not listen at a high volume level for
long periods of time. Adjust the volume to a safe level.
WARRANTY CONDITIONS:
- In the event of a defect, return the product to your reseller with a description of the failure, proof of purchase and all accessories.
- During the warranty period, you will receive a new product from the reseller (if available).
- Contact WISEQ if any accessories are missing (manual, software or parts).
- Warranty will be void in cases of opened products, water damage, physical damage, misuse, modification, repair by unauthorized persons, carelessness, and using the product for other purposes than its intended use.
EXCLUSIONS OF WARRANTY:
- Damage is caused by accidents or disasters, such as fire, floods, earthquakes, war, vandalism or theft.
- Incompatibility with other hardware/software which doesn’t meet the minimum system requirements.
- Damage on accessories such as batteries and fuses.
WISEQ will not be liable for any consequential or incidental damages, including any loss of business profits or other damages, arising out of the use of its product.
For further safety information, please visit the website: www.wiseq.nl/safetyinformation
DECLARATION OF CONFORMITY
EN60950-1 (A1:2010+A12:2011+A2:2013)WISEQ