STARBLITZ LED Ring Flash User Guide
- June 7, 2024
- STARBLITZ
Table of Contents
STARBLITZ LED Ring Flash User Guide
NOTES
-
Please read this manual in details before using it.
-
Disassembling is strictly prohibited. No unauthorized welding LEDs without professional LED weld technician.
-
Please unplug when you are not using the product to prevent power loss.
-
Please pay attention to safety rules: don’t fall it down, it may cause fire.
-
The quality warranty doesn’t include the damage caused by human factors.
-
1/4 screw mounting hole
-
Knob to adjust brightness light
-
Knob to adjust warm/white light
-
Hot shoe
-
1/4 mounting screw
-
Power switch
-
Power input interface
-
Angle screw
-
Light stand screw
PRODUCT INTRODUCTION
The SRINGLED480 ring light adopts high-brightness LEDs. Its life time is longer than 50000 hours. It’s efficient, energy saving and low light loss. Inside power adapter can supply power from 100-250V and the color temperature can be adjusted from 3000-6500K with stable quality (CRI 90). Ring light can be applied to indoor and outdoor shooting, portrait photography, wedding photography, makeup lighting and lighting filling.
OPERATING INSTRUCTION
- Install the ring light on the light stand and adjust it to find the perfect angle.
- Plug power line to the ring light. Press the power switch to turn on the light. The brightness light can be adjust through the screw knob and the brightness of the warm/white light can be adjust through the other screw knob. The color temperature is controlled in this way.
- It’s possible to use a mobile phone holder (sold separately): connect the phone holder to the hot shoe on the ring light and screw the knob to Lock it; then, put the mobile phone into the holder; finally, adjust the shooting angle of the mobile phone and get it started.
- It’s possible to use a make up mirror (sold separately): focus the installation part on the mirror to the screw hole on the middle of the ring light, then screw the knob to get it locked.
- It’s possible to use a camera: screw the dedicated screw (sold separately) for the camera into the screw hole on the middle of the ring light, then install a camera on it.
- Please turn off power and unplug the power line after shooting.
FEATURES
Model 1250019
Power 60W
Illuminance 3600 LUX
CCT 3000-6500K±200K
CRI ≥90
LED Qty 480 PCS
Light angle 120º
Operating voltage AC:100-250V
Standard access Power line, user guide, shockproof bag, light stand and
billhead
NOTES AND MAINTENANCE
Do not use the equipment near flammable gases, gasoline, benzene, thinner or
similar substances to avoid the risk of explosion, fire or burns.
Keep the equipment out of the reach of children. Young children cannot
understand the information in Safety Precautions and Cautions on Use, which
may cause an accident.
Do not attempt to disassemble, repair or alter the equipment yourself. Please
contact your reseller first or refer to Starblitz.fr.
24-month warranty.
Printed in P.R.C.
References
- Starblitz les accessoires photo essentiels ! - Starblitz
- Starblitz les accessoires photo essentiels ! - Starblitz