BARBERBOSS QR-2081 Professional Hair Trimmer Instructions
- June 15, 2024
- BARBERBOSS
Table of Contents
Instructions for use
How to charge:
- Please remove any comb attachments from the trimmer before charging, then insert the provided USB cable fully into the trimmer and your chosen USB port. The LED display will light up, showing the charging percentage, confirming the charging process has begun. With a low voltage requirement of 5V 1A, you can charge the trimmer using a laptop, power bank, or car port, making it perfect for on-the-go grooming.
How to clean:
- This trimmer is designed to be waterproof, perfect for both wet and dry grooming. After each use, simply remove the trimmer head and rinse under running water, using the provided brush to remove all hairs. Dry the blade completely before reinserting to ensure longevity. Wipe the clipper body with a dry cloth, and apply a drop of oil to the blade. These simple steps will keep your clipper running smoothly for extended use.
*Always switch OFF the trimmer and unplug or remove the power supply cord before cleaning.
How to remove and install the trimmer head:
- To install the head, align it with the trimmer body and click it into place. To remove the head. simply push the blade until it falls off.
How to attach/use the guide combs:
- Choose from 4 guide combs (4-6mm, 7-9mm, 10-12mm, 16-18mm) and effortlessly click them onto the trimmer head. The raised areas on the combs are designed to slot perfectly into the trimmer head, ensuring stability with no movement during trimming.
- To achieve a 4mm trim, attach the correct comb to the trimmer body, and push the slider on the trimmer body to the top (so you can see 0.8mm underneath). To achieve a 6mm trim, push the slider to the bottom (so you can see 2.0mm above).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>