WMF 0416740011 Master Silent High Speed Blender Instruction Manual

WMF 0416740011 Master Silent High Speed Blender

Specifications

• Model: WMF Master Silent High Speed Blender
• Power: High-speed motor
• Capacity: Large mixing jar
• Programs: Smoothie, Ice Crush, Sorbet, Dessert, Cleaning, Manual, Pulse
• Additional Features: On The Go Bottle, Memory Function, Standby Mode

Product Usage Instructions

Components

Before using the blender, ensure all components are present and undamaged.

Before Use

Ensure the blender is placed on a stable, flat surface near a power outlet.

Unpacking

Remove all packaging material and keep away from children to prevent choking hazards.

Important Safety Instructions

Follow all safety symbols and warnings provided in the manual.

Startup

Be cautious of the sharp blades and potential splashes. Always ensure the lid is securely locked before operation.

Cleaning and Maintenance

After blending, wait for the blades to stop completely before removing the lid for safety. Regularly clean and maintain the blender for optimal performance.

Recipes

Experiment with various recipes provided in the manual to explore the blender’s capabilities.

Additional Information

Utilize the different programs available for specific blending tasks such as smoothies, ice crushing, sorbets, desserts, and manual pulsing.

Frequently Asked Questions

Q: How do I use the On The Go Bottle feature?

A: Securely attach the On The Go Bottle to the blender by twisting until it clicks into place. Start the blending process once properly attached.

Q: What should I do if the blade is sharp?

A: Be cautious of the sharp blades to avoid injuries. It is recommended to stop the motor before use and ensure the lid is correctly locked during operation.

Q: How do I clean the blender?

A: After blending, wait for the blades to stop spinning before removing the lid. Regularly clean all parts as per the cleaning instructions provided in the manual for proper maintenance.

COMPONENTS

OVERVIEW OF COMPONENTS

1. Locking cap
2. Lid
3. Blending container made of Tritan
4. 1 Blender blade unit
5. 2 ON THE GO blender blade unit
6. Engine block
7. Display
8. On/off switch
9. Wheel
10. ON THE GO bottle made of Tritan
11. Drinking lid
12. Tamper
13. Cleaning brush

BEFORE USE

• Read the operating instructions carefully. They contain important information on operating and maintaining the appliance as well as safety instructions.
• Keep the instructions in a safe place and pass them on to any future users. Incorrect use can cause damage.
• The appliance should only be used for the intended purpose and in accordance with the operating instructions.
• The appliance is not intended for commercial use, but only for the preparation of food in normal household quantities.
• This appliance is not attented to be used in:
  • staff kitchen areas in shops, offices and other working environments;
  • farm houses;
  • by clients in hotels, motels and other resi-dential type environments;
  • bed and breakfast type environments.
• Before assembling and using the appliance for the first time, remove any stickers that may be present and clean the parts which come into contact with food as well as the removable parts as described in the chapter “Cleaning and care”. Always refer to the safety instructions when using the appliance.
  If the safety instructions are not observed, we shall assume no liability for any damage.

UNPACKING

Danger of suffocation!

Children could pull packaging material over their heads or wrap themselves in it and suffocate.

• Keep the packaging material out of the reach of children.
• Do not allow children to play with the packaging material.

Children can inhale or swallow small parts and suffocate.

• Keep small parts out of the reach of children.
• Do not allow children to play with the small parts.
• Remove the protective films and packaging material in full. No packaging should remain inside the appliance.
• Recycle all packaging material (paper, cardboard, cotton bags, fiber bags).
• Check that the appliance and accessories are complete and not damaged.
• If any parts are missing or damaged, do not operate the appliance and notify Customer Service.

WMF Consumer Service Tel.: +49 (0)7331 256 256 eMail: contact- de@wmf.com

IMPORTANT SAFETY INSTRUCTIONS

• WARNING indicates a hazardous situation that can cause serious injuries (e.g. burns caused by steam or hot surfaces).
• CAUTION indicates a potentially hazardous situation that can lead to minor or moderate injuries.
• ATTENTION indicates a situation that can lead to material damage.
• NOTE provides additional information regarding safe handling of the product.
• observe and follow the symbols and indications.

WARNING

IMPORTANT SAFETY INFORMATION ABOUT SOCKETS AND THE MAINS CABLE

• Do not immerse the appliance in water.

Only for the European market:

• This appliance can be used by children older than 8 years of age as well as by people with lim-ited physical, sensory or mental capabilities and persons lacking experience and/or lacking knowl-edge, if they are supervised or have received instructions on how to use the appliance safely and have understood the result-ing risks. Children must be super-vised in order to ensure that they do not play with the appliance. Children must not clean or main-tain the appliance unless they are older than 8 years of age and are supervised.
• Keep the appliance and the mains cable out of the reach of children under 8 years of age.

For markets out of Europe:

• This appliance is not intended for use by persons (including chil-dren) with reduced physical, sen-sory or mental capabilities, or lack of experience and knowl-edge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

IMPORTANT INFORMATION FOR YOUR PERSONAL SAFETY

WARNING

• Risk of injury: Be careful when handling the sharp cutting blades, when filling/emptying the container and when cleaning.

• Always use the appliance in accordance with these instruc-tions. Improper use can result in electric shock or other hazards.

• If the mains cable of this appli-ance is damaged, it must be replaced by the manufacturer’s after-sales service or a similarly qualified person. Unauthorized repairs could put the user at con-siderable risk.

• After use, clean all surfaces that have come into contact with food. Follow the instructions in the “Cleaning and care” section. Always unplug the mains plug from the socket before remov-ing any ingredients causing
  a blockage.

• Be careful when filling with hot liquids (max. 80°C!) as they could be ejected out of the appliance in the form of a sudden burst of steam. Only fill with hot liquids when the appliance is switched off!

ADDITIONAL SAFETY INFORMATION

• Only connect the appliance to a properly installed grounded socket. The mains cable and plug must be dry.
• Do not pull the mains cable over sharp edges or pinch it. Do not let it hang down. Protect it from heat and oil.
• Never pull the mains plug out of the socket by the mains cable or with wet hands.
• Stop using the appliance and/or pull the mains plug out of the socket immediately if:
  • the appliance or mains cable is damaged;
  • the appliance is leaking;
  • the blade is blocked;
  • you suspect the appliance is defective after it has fallen or similar.
• In these cases, return the appli-ance for repair.
• Do not place the appliance on hot surfaces, e.g. hotplates or similar or near open gas flames, as it could melt.
• Do not place the appliance on surfaces that are sensitive to water. It could get damaged by splashes.
• Never operate the appliance unsupervised.
• Do not move the appliance during operation and do not pull on the mains cable.
• Do not switch on the appliance when the blending container is empty.
• The blender must not be operated without liquid.
• Fill the blending container beyond the MAX mark.
• Do not let the appliance run con-tinuously for more than 3 min-utes. Allow the appliance to cool down to room temperature before you continue processing.
• In the event of misuse, incor-rect operation or unprofes-sional repairs, no liability shall be assumed for any damage. War-ranty claims will be deemed invalid in such cases.

USING THE APPLIANCE FOR THE FIRST TIME

Before using the appliance for the first time, remove all packaging and thoroughly clean the appliance, blending containers, lid and locking cap as well as all accessories (see chapter “Cleaning and care”).

WARNING

• Be careful not to injure yourself on the sharp blade.
• The appliance is suitable for blending and chopping foods such as fruit, vegetables and nuts and for preparing juices, smoothies and shakes.
• The delivery scope includes two blending containers. A blending container made of high-quality Tritan (BPA-free) with a capacity of 1.75 l and an ON-THE-GO bottle made of high-quality Tritan with a capacity of 0.6 l and a separate blade unit. Both blending containers can be placed on the motor block, depending on the quantity of food to be prepared.
• Now fill with the ingredients. Pay attention to the maximum filling level mark on the blending containers.
• If you fill beyond the mark, it could overflow, depending on the consistency of the ingredients. For frothy foods, we advise that you only fill the jug halfway. Close the blending container with the lid and locking cap. The blender must also not be operated without liquid.
• To remove the lid of the 1.75 l blending jug, turn it to the right and lift it slightly. To remove the locking cap in the lid of the 1.75 l blending jug, turn it anti-clockwise. You can add other ingredients after removing the locking cap. Beware of splashes! We recommend stopping the motor before you remove the locking cap. When using the blender, always snap the locking cap back into place properly.
• Make sure the blade unit is securely attached (otherwise the blending container will not fit on the blender properly) and the blending container and lid are in the correct position before using the appliance.

NOTE
The motor block can only be switched on when the blending container and lid are correctly attached. A safety cut-out function prevents operation without a jug and lid.
After blending, wait for the blade to come to a standstill before removing the lid.

START
Place one of the two blending jugs on the motor block. The large blending jug can only be attached in one position (handle pointing to the front right).
Turn on the motor block by pressing the ON/OFF symbol at the top left edge of the display. The display lights up. The top left edge of the display shows which of the two supplied blending jugs has been placed on the motor block.

CONTROL
Select your program, manual speed setting or pulse function by turning the wheel to the right or left. Press the wheel to confirm your selection.
If you want to go back one level in the menu selection, keep the wheel pressed for approx. 1 second.
To end the blending process, briefly press the wheel, press the ON/OFF symbol, pull out the mains plug.

ON-THE-GO BOTTLE
Fill with the ingredients and screw the blade unit fi rmly onto the ON-THE-GO bottle up to the arrow.
Place the ON-THE-GO bottle on the motor block by turning it into the correct position until it clicks. You can now start the blending process.

NOTE
The motor block can only be switched on when the ON-THE-GO bottle is correctly attached. A safety cout-out function prevents operation without it.

PROGRAMS

The blender has 7 programs when the 1.75 l blending jug is attached and 5 programs when using the ON-THE-GO bottle:

ADDITIONAL INFORMATION

Tamper
You can use the tamper to push any food that is stuck to the edge back to the knife blade.
To do this, remove the locking cap from the tightly closed lid and insert the tamper into the opening. Move the tamper along the walls and corners of the jug to further crush the food. Snap the locking cap back into place correctly before operating the appliance again.

Cleaning brush
The cleaning brush can be used to clean the blending jugs and the blade unit. You can remove the blade unit for easier cleaning. The blade unit of the 1.75 l blending jug can be unscrewed more easily with the back of the cleaning brush.

Standby mode
The appliance automatically switches to standby mode after 3 minutes. By pressing the on/off switch the appliance reverts to function mode.

Memory function
The blender is equipped with a memory function. If a program is interrupted less than 3 minutes, the blender displays the last selected setting after restarting.

Overload protection
The appliance is equipped with overload protection. This prevents the motor from being damaged if the load is too high. If the appliance switches off during operation, proceed as follows:

• Press the on/off switch to switch off the appliance, pull out the mains plug and allow it to cool down for approx. 15–20 minutes.
• Reconnect the appliance to the power supply, switch it on by pressing the on/off switch and continue the blending process.

CLEANING AND CARE

ATTENTION
Before cleaning, pull out the mains plug. Never immerse the motor block in water. Instead, just wipe the outside with a damp cloth and then rub it dry. Do not use abrasive cleaning agents.

WARNING
Be careful not to injure your-self on the sharp knife when cleaning the blending jug. Use the cleaning program for easy cleaning of the blending container.
To do this, fi ll the container with 200 ml of water and one drop of washing-up liquid immediately after blending, place the lid with the locking cap on the blending container and start the cleaning program.
At the end of the program, remove the jug and rinse with clear water.

ATTENTION
The blending container with blade unit and the seals must not be placed in the dishwasher.

RECIPES

TECHNICAL SPECIFICATIONS

Nominal voltage: 220 -240 V~ 50 – 60 Hz
Power consumption: 1600 W
Protection class: II
The product goes into stand-by after 3 minutes without use.

The appliance complies with European directives 2014/35/EU, 2014/30/EU and 2009/125/EU

Environment

Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

Kundendienst-Adresse:
Tel.: +49 (0) 7331 256 256
E-Mail: contact-de@wmf.com

Hersteller:
WMF GmbH
WMF Platz 1
73312 Geislingen/ Steige
Germany
wmf.com
CMMF 7211419080 | Model 04 1674 0011 | 002 | 11/23

ЗАО «Группа СЕБ-Восток» 125171, Москва, Ленинградское шоссе, д. 16А, стр. 3
8(495) 213-32-31
contact-ru@wmf.com

References

• WMF Onlineshop | Tradition und Qualität seit 170 Jahren

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>