SOUNDPEATS Opera 03 Wireless Earbuds with LDAC High Resolution Audio User Manual
- June 17, 2024
- SoundPEATS
Table of Contents
SOUNDPEATS Opera 03 Wireless Earbuds with LDAC High-Resolution Audio
Product Information
Specifications
- Product Name: SOUNDPEATS Opera03
- Manufacturer: Alza.cz a.s.
- Model: Opera03
Product Usage Instructions
First Use
- Open the lid of the charging case.
- Long press the button on the side of the charging case until the indicator light flashes white.
- The earbuds will enter pairing mode.
- Turn on your device’s Bluetooth and connect to SOUNDPEATS Opera03.
Factory Re set
To perform a factory reset:
- Automatically: Place the earphones back into the charging case and close the lid.
- Manually: Press and hold the multifunctional button for 10 seconds while the earphones are on.
Wearing Metho
Identify the left and right earbuds and rotate them to find the most comfortable position.
Operation Diagram
| Controls | Action |
|---|
Frequently Asked Questions
What does the indicator light on the charging case display?
When the charging case is not being charged, it shows the remaining power:
-
* 100~50%: Green- 49~10%: Yellow
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
- ✉ www.alza.co.uk/kontakt
- ✆ +44 (0)203 514 4411
First Use
First, open the lid of the charging case, then long press the button on the side of the charging case until the indicator light of the charging case flashes white, then the two earbuds enter the pairing mode. Next, turn on your device’s Bluetooth and connect to SOUNDPEATS Opera03.
Factory Reset
In order to perform a factory reset, place both earbuds back into the charging case and make sure they are correctly placed. With the case lid open, long press the button on the side of the charging case for 10 seconds until the LED indicators of the charging case flash white and red alternately twice – this signifies that the reset has been completed. Finally, close the case lid, open it again – now they are activated successfully.
Wearing Method
Identify the left and right earbuds and rotate the earbuds to find the most
comfortable position.
Operation Diagram
Controls
- Power on Automatically: Open the charging case, the earphones turn on automatically.
- Manually: Press and hold the multifunctional button for 1.5 seconds while the earphones are off.
- Power off Automatically: Place the earphones back into the charging case and close the case lid.
- Manually: Press and hold the multifunctional button for 10 seconds while the earphones are on.
- Play / Pause Double-tap on the multifunctional button.
- Decrease volume Single tap on the left multifunctional button.
- Increase volume Single tap on the right multifunctional button.
- Next track Press and hold the right multifunctional button for 1.5 seconds.
- Noise reduction modes Press and hold the left multifunctional button for 1.5 seconds.
- Answer / hang up a call Double tap on the multifunctional button.
- Reject a phone call Press and hold the multifunctional button for 1.5 seconds.
- Switch between two calls Press and hold the multifunctional button for 1.5 seconds.
- Activate/deactivate the voice assistant Press the right multifunctional button three times.
Frequently Asked Questions
- What does the indicator light on the charging case display?
- When the charging case is not being charged, it shows the remaining power:
- 100~50%: Green
- 49~10%: Yellow
- <10%: Red
- When the charging case is being charged, it shows the charging process:
- <20%: The red light flashes slowly.
- 20~69%: The yellow light flashes slowly.
- 70~99%: The green light flashes slowly.
- 100%: The green light stays on.
- How to charge the charging case?
- Connect the charging case to a Type-C charger. The current does not exceed 1A. If the earphones stay idle for an extended period of time, charge them at least every three months to prevent the battery from being damaged.
- Why are the earphones still connected to the phone when they are put back into the charging case and the case lid is closed?
- Check whether the charging case has battery power. If it has run out of battery, closing it will not disconnect the earphones from the device.
- Ensure the earphones are properly placed in the charging case and the charging metal sheet and pins are clean. Wiping clean the contact points on the earphones and the charging case should fix this issue.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and Directive 2011/65/EU amended (EU) 2015/863
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>