tts IT01118B TacTile Reader Code Reader User Guide

June 6, 2024
tts

tts IT01118B TacTile Reader Code Reader

WHAT’S IN THE BOX?

tts IT01118B TacTile Reader Code Reader fig2

ALSO AVAILABLE IN THE RANGE

EXTENSION PACK

tts IT01118B TacTile Reader Code Reader fig3

Tactile Reader

tts IT01118B TacTile Reader Code Reader fig4

tts IT01118B TacTile Reader Code Reader fig6 tts IT01118B TacTile Reader Code Reader fig7 tts IT01118B TacTile Reader Code Reader fig8 tts IT01118B TacTile Reader Code Reader fig9

WEEE Statements

Waste Electrical and Electronics Equipment (WEEE) – When this appliance is out of use, please remove all batteries and dispose of them separately. Bring electrical appliances to the local collecting points for waste electrical and electronic equipment. Other components can be disposed of in domestic refuse.

Directive 2014/53/EU Statements

EN RM Resources hereby declare that this wireless device – IT01118 TacTile Reader The full text of the EU declaration of conformity is available at the following internet address
https://www.tts-group.co.uk/DoCs.html

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

USB Statements
This toy is only to be connected to equipment bearing either of the following symbols.

MY NOTES

More Information At
www.tts-group.co.uk
Tel: 0800 138 1370
Fax: 0800 137 525

Please retain this manual as it contains important information Chargers used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and that, in the event of such damage, the toy must not be used with the charger until the damage has been repaired. Under the environment with electrostatic discharge, the toy may malfunction and require user to reset the toy. Rechargeable batteries should be charged under adult supervision. This toy contains batteries that are non-replaceable. Battery: DC 3.7V, 2600mAh Lithium polymer (Non replaceable)

Made in china on behalf of RM Resources Product Code: IT01118

Documents / Resources

| tts IT01118B TacTile Reader Code Reader [pdf] User Guide
IT01118B, TacTile Reader Code Reader
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

tts User Manuals

Related Manuals