StarBoard How to Install the OPS Module on Android 11 Installation Guide
- June 9, 2024
- StarBoard
Table of Contents
Quality, Value, Innovation
How to Install the OPS
Perform the following steps to install the OPS Module on Android 11
-
Unscrew the two screws to remove the OPS module cover.
-
Insert the OPS Module into the slot. Make sure the power button is on the bottom. Also, install the two screws removed in step 1 to secure the OPS Module.
- Screw in the Wi-Fi antenna so that you can connect to the internet.
Caution: Do not install the OPS Module while the interactive panel is powered on. This may damage the device. Always install the OPS while the panel is powered off.
For tech support, please contact 800-615-9855 or help@starboard- solution.com – 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>