ONECONCEPT 10028440 Ice Breaker Instruction Manual
- May 15, 2024
- ONECONCEPT
Table of Contents
ONECONCEPT 10028440 Ice Breaker
Specifications:
- Item number: 10028440, 10028938
- Power supply: 220-240 V ~ 50/60 Hz
Product Information
Safety Instructions
It is important to read and follow all safety instructions provided in the user manual to avoid any damages or accidents.
Product Description:
The icebreaker consists of an ice chute, housing, ON/OFF switch, and ice container.
Use and Operation:
- Place the ice crusher (clear bowl) under the bottom opening of the unit. Plug in the unit and turn the power switch to the on position. Ensure the ice container is secured.
- Drop ice cubes into the feeder chute opening on top of the unit. Do not push cubes into the blades by hand or any other object.
- If a large cube gets stuck, turn off the unit, unplug it, pour warm water down through the feeder chute to melt the cube, then resume operation.
Cleaning and Care:
Regularly clean the icebreaker according to the instructions provided to maintain its performance and longevity.
Disposal Considerations:
Follow the disposal considerations mentioned in the manual when disposing of the product to minimize environmental impact.
Manufacturer & Importer:
Manufacturer: Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain: Berlin Brands Group UK Limited PO Box 42 272 Kensington High Street London, W8 6ND United Kingdom
FAQ
Q: What should I do if the ice crusher is not operating?
A: Ensure the ice container is securely in place and try again. If the issue persists, refer to the troubleshooting section in the user manual.
Q: How often should I clean the icebreaker?
A: It is recommended to clean the icebreaker after every use to prevent any residue buildup and ensure hygienic operation.
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual
carefully and take care of the following hints to avoid damages. Any failure
caused by ignoring the items and cautions mentioned in the instruction manual
is not covered by our warranty and any liability. Scan the QR code to get
access to the latest user mannual and other information about the product
TECHNICAL DATA
- Item number: 10028440, 10028938
- Power supply: 220-240 V ~ 50/60 Hz
SAFETY INSTRUCTIONS
- Read all the safety and operating instructions carefully and retain them for future refe- rence. To protect against risk of electrical hazards, do not Immerse the Wonder chopper Ice Crusher in water or other liquids.
- Unplug from outlet when not in use, before assembling or disassembling, and before cleaning. Avoid contacting moving parts. Never place fingers or other utensils into feed or discharge areas.
- If the plug does not fit, contact a qualified electrician. Do not modify the plug in any way.
- Do not operate the unit with a damaged cord or plug, or after the unit malfunctions, is dropped or damaged cord or plug, or after the unit malfunctions, is dropped or damaged in any manner. Return it to the nearest authorized service facility.
- When the Ice Crusher is used by or near children, close supervision is necessary. 8. Do no use outdoors. Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Check feeder chute for presence of foreign objects before using. Use only attachments that are included in the packaging of the Wonder chopper Ice Crusher. The use of other attachments may cause fire. Electric shock or injury.
PRODUCT DESCRIPTION
USE AND OPERATION
- Place the ice crusher (clear bowl) packed with the unit under the bottom opening of the ice crusher. Plug the unit in and set the on/off power switch to the on position. Note: ice crusher will not operate unless ice container is secured into position.
- To begin crushing ice, drop cubes into feeder chute opening on top of unit. Blades of crus- her unit are self feeding. Do not attempt to push cubes into blades with hand or instrument.
- If a large cube should become lodged in the crushing unit so that blades cannot reach it, set power switch to the off position and unplug unit from outlet. Then pour warm water down through feeder chute until lodged cube is melted or falls free. Plug unit back into outlet, set the power switch to the on position, and resume feeding cubes through the feeder.
CLEANING AND CARE
- Unplug power cord form outlet.
- Pour hot water through top feeder chute to rinse out after each use.
- Wipe outside of ice crusher with a clean damp cloth.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Limited PO Box 42 272 Kensington High Street London, W8
6ND United Kingdom