VEVOR DSM1-100008B Digital Torque Screwdriver User Manual

Technical Support and E-Warranty Certificate
www.vevor.com/support
DIGITAL TORQUE WRENCH
USER MANUAL

DSM1-100008B Digital Torque Screwdriver

We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
DIGITAL TORQUE WRENCH
MODEL: DSM1-100008B

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:
[email protected]
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
IMPORTANT SAFETY INSTRUCTIONS
Warning – To reduce the risk of injury, user must read instructions manual carefully.
This symbol, placed before a safety comment, indicates a kind of precaution, warning, or danger. Ignoring this warning may lead to an accident. To reduce the risk of injury, fire, or electrocution, please always follow the recommendation shown below.
WARNING

1. Using overload (exceeding 120% of the maximum operating torque value) may cause damage to the screwdriver or loss of accuracy.
2. Do not shake the screwdriver violently or drop it to the ground.
3. Do not use a screwdriver as a striking tool.
4. Do not place the screwdriver in areas with high temperature, humidity, or direct sunlight.
5. Do not use a screwdriver near water.
6. If the screwdriver is accidentally wet, please immediately wipe it with a dry towel. The salt in the seawater may damage the screwdriver.
7. Do not use organic solvents to clean the screwdriver, such as alcohol or paint thinner.
8. Do not place the screwdriver near magnetic objects.
9. Do not place the screwdriver in a dusty or sandy area as this can cause serious damage to the screwdriver.
10. Do not press the LCD screen under gravity.
11. Please apply an appropriate amount of force, and the application point should not be at the end of the grip.

Product structure

Main functional features:

1. Digital display of torque value, clockwise and counterclockwise operation.
2. Peak and Track modes.
3. +/-2% (forward rotation) accuracy (between 20% and 100% of the maximum operating torque value).
4. When the set torque value is reached, the buzzer and light will alert with a green light of 85% -90% and a red light of 100% will light up.
5. Press the backlight button to select whether the backlight is on or off. Long press and hold for three seconds to lock the button to prevent accidental operatior adjust the torque value.
6. Can be preset to P-P8, and can store 500 sets of data.

PRODUCT PARAMETERS

1. Model: DSM1-100008B
2. Range: 0.3~8N.m
3. Increment : 0.01N.m
4. Support unit: N.m, ft-lb, in-lb, and kg.cm
5. Use 2pcs AAA 7 batteries；
6. Maximum torque value: 8N.m/5.9ft-lb/70.8in-1b/81.6kg.cm
7. Driver size: 1/4inch
8. Range and Precision : ±2%
9. Screwdriver bit Material and QTY: CrV ; 12pcs ;
10. Screwdriver bit list:

Setting

pay attention to

1. If it appears during startup Screen, representing
2. This wrench has exceeded 12096 of the maximum operating torque value when applying force 2.The unit switching selection mode is unidirectional loop.

Step 3: Peak Hold/Trace ability Mode Selection

Step 4:Trace ability mode operation steps and functions

Precautions before using a screwdriver

5.1 Battery installation

1. Open the battery cover
2. Place two AAA 7 batteries into the battery box, paying attention to the direction of the positive and negative electrodes.
3. Install the battery onto the back cover and tighten the screws.

Remove two screws and the back cover, install the battery and cover the back cover, and tighten the screws.
5.2 Turn on the power and reset the wrench

1. press Turn on the screwdriver power supply.
2. Before use, press the Reset the screwdriver.
   Be careful:

Be careful:
If external force is already applied to the screwdriver before turning on the power.there will be an offset value displayed on the screen after turning on the power.Please press the button to reset the screwdriver before normal operation and use.
5.3 Backlight and button locking function

1. Press Press the key to turn on the backlight on the display screen.
2. Long press Press the key for three seconds to lock the adjustment button to
3. Prevent the screwdriver from accidentally changing the set value during use Unlock, long press Press the key for three seconds to unlock the device and set the screwdriver value.

5.4 Wake up the screwdriver in power saving mode

1. To save power, press and hold the wrench when it is not working Key can shut down.
2. press The key can awaken the screwdriver for normal operation.

5.5 Battery handling method

1. If the screwdriver is not used for a long time, please remove the battery.
2. When you need to travel long distances or are in a cold area, please prepare a backup battery.
3. Do not mix different brands of batteries, nor do you mix old and new batteries.
4. Sweat, water, oil stains, etc. can hinder the contact of battery electrodes. Please wipe the battery clean before inserting a torque screwdriver.
5. Please discard the used battery in the designated recycling area and do not place it in a fire.

6. Matters needing attention:

1. When measuring wrench, press the Key into mode selection, press the up and down keys to select TRACK mode
2. press Key Select Backlight 0n/0ff, Long Press Keys for 3 seconds lock keys to prevent incorrect operation Adjusting Torque
3. Torque wrench screwdriver must not force more than 110% of the maximum screwdriver torque
4. When installing the rear cover of the battery, press the specified arrow lightly, lock left-hand and release right-hand.
5. Do not use a torque screwdriver as a hammer or lever for irregular operation
6. To maintain good accuracy, it is recommended to recalibrate approximately every year or 10000 times.
7. Please consult your local distributor for relevant calibration matters.

Disposal

This product is subject to the provision of European Directive2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

FCC Declaration:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and(2)this device must accept any interference received, including interference that may cause undesired operation.
Address： Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
** Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Made In China**

Technical Support and E-Warranty Certificate
www.vevor.com/support

Documents / Resources

| VEVOR DSM1-100008B Digital Torque Screwdriver [pdf] User Manual
DSM1-100008B, DSM1-100008B Digital Torque Screwdriver, Digital Torque Screwdriver, Torque Screwdriver, Screwdriver
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>