AOKIA 363 PSI 1.0 GPM Cordless Power Pressure Washer User Manual

AOKIA 363 PSI 1.0 GPM Cordless Power Pressure Washer User Manual

READ ALL INSTRUCTIONS

WARNING: Read all safety warnings &instructions. Failure to follow the warnings and instructions may result inelectricshockor injury. Save all warnings and instructions for future reference.

READ & UNDERSTAND OPERATOR’S MANUAL

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.

AWARNING: Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER” “WARNI NG” and “CAUTION” before using this tool. Failure to following all instructions listed below may result in electric shock, fire, and/or serious personal injury.

DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform the user of important information and/or instructions that could lead to equipment or other property damage if they are not followed. Each message is preceded by the word “NOTICE”, as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are not followed.

WARNING: The operation of any power tools can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Please always wear safety goggles or safety glasses when operating the power tools if needed.

SAFETY PRECAUTIONS

DANGER : Do not use the pressure washer if switch trigger does not turn on or off.

DANGER: Do not dispose of the batteries in a fire. The cell may explode. Check with local codes for possible special disposal instructions.

DANGER: Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

NOTICE:

1. Do not put the car washer near fire sources or other high temperature places.
2. Please be sure to use the original factory-configured charger for charging, and do not use chargers and lithium battery packs that are not dedicated to this product.
3. Do not spray water on equipment containing electrical components.
4. Stop using the product when it accidentally falls to the ground and causes visible damage or malfunction.
5. When used at normal temperature (20°C±5°C), the performance of the lithium battery pack is the best.
6.  When cleaning the product, please wipe it with a dry cloth. Do not use chemical solvents such as water, gasoline, alcohol, etc.
7. Please clean the water inlet filter and the water pipe filter filter regularly.
8. Discarded batteries should be recycled separately and should not be thrown into trash cans.
9. Do not use the provided charger on any other device.
10. Do not charge in high temperature environment.
11. Only charge indoors to prevent rain.
12. . If the power cord is damaged, it must be replaced by the manufacturer, its maintenance department or similar professionals to avoid danger.

PRODUCT INTRODUCTION

Open the package and take out the car washer, accessories and materials. Keep the outer packaging for future transportation and maintenance.

Note : In order to ensure that the products meet the factory quality standards, the new machine will be connected to water and electricity for quality inspection before they leave the factory. Some machines will have water stains, which is a normal phenomenon and will not affect the use.

PRODUCT AND ACCESSORIES:

SPECIFICATIONS

INSTALLATION GUIDE

STEP 1 – Installation of the battery pack

1. Align the guide rail of the lithium battery pack with the guide rail under the handle of the host according to the direction of the arrow as shown in the figure, and slide until the battery is locked.
2. When removing the lithium battery pack, press the middle button of the lithium battery pack and pull it out in the opposite direction at the same time.
   Note: During the installation process, avoid battery contact with water.
   

STEP 2 – Installation of water gun and nozzle

1. Extension rod installation: align the extension rod interface with the thread of the gun body, rotate clockwise, and tighten the extension rod.
2. Attach the copper joint of the multi-sprinkler to the extension rod, and at the same time pull the copper joint back by hand, then loosen the copper joint and fasten it. Choose the water spray mode as needed.
   

STEP 3 – Installation of water inlet pipe
Push the quick connector of the water inlet pipe backward, and insert the quick connector into the water inlet of the main unit at the same time, then you will hear a “click” sound means that it is installed in place.

Remove the water inlet pipe: Pinch the water inlet pipe quickly and push the connector backwards and pull out at the same time to remove the water inlet pipe.

CHARGE THE BATTERY

1. Insert the AC/DC adapter into the household current receptacle. The green light is on. The green light is the power indicator.
2. Properly insert the charger into the battery. The red light is on. The red light is the charge indicator.
3. Normal charging time is 2-3hours. When the battery is fully charged, the red light will turn off, and the green light is on.
4. When charging more than one battery pack in succession, allow 15 minutes between charges.

CLEANING AND MAINTENANCE

Water inlet pipe filter: regularly clean the water pipe filter to block the water inlet of the waterproof pipe, resulting in poor water inlet. Method: as shown in the figure below, unscrew the water pipe filter for cleaning.

After use, please unplug the lithium battery pack, remove the nozzle and the water inlet pipe, drain the remaining water inside the machine and the water inlet pipe before storing. Lithium battery maintenance:

1. The lithium battery pack needs to be stored separately in a dry place (waterproof, sun-proof, and moisture-proof). Do not leave it in a car or other high-temperature environments for a long time.
2. Please store the machine in a safe and dry place, out of reach of children.
3. It is forbidden to use lithium batteries when they are swollen or immersed in water.

TROUBLESHOOTING

Check whether the power supply is normally energized, and ensure that the charger is correctly connected to it
Little or no water output| The filter is clogged causing poor water inflow| Cleaning the filter
Knotted inlet pipe| Straighten out or replace the water inletpipe
Many impurities in thewater| Replace clean water
Clogged nozzle| Clean the nozzles in the nozzle
Does      not      absorb water| Poor connection between water pipe joint and waterline| Connect the water inlet pipe joint to the water inlet of the machine inplace
The hose filter is not fully inserted into the water| Insert the hose filter fully into the water
The water inlet sealingring is off or damaged| Install or replace thesealing ring
Leaking water outlet| Nozzle is not installedin place| Install the nozzle andhost in place

POST-SALE SERVICE

Hi Friend!
I am honored that you choose Aokia, we will do our best toprovideyouwith excellent quality and service!

If you have any questions when using the lawn trimmer, pleasedon’tworry,we provide 1-year warranty and try our best to solve your problem, pleasedo not hesitate to contact us. We offer 24-hour customer service.

We have always stood with you. We appreciate your suggestionsverymuch. If you are satisfied with our products, you can shareyour experiencewith us or other customer.

Thank you for purchasing and joining the Quality Improvement Programof Aokia Cordless Pressure Washer. After-sale Service Telephone: 571-490-5401
After-sale Service Email: aokiaau@163.com

Sincerely!
Aokia Team

Contact us if you still have any question on your pressurewasher.
Between 10:00 AM — 6:00 PM EST, M-F

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>