Anmossi ST-RGB-5MP 16.4ft RGB LED Strip Light Kit User Manual
- June 10, 2024
- Anmossi
Table of Contents
Anmossi ST-RGB-5MP 16.4ft RGB LED Strip Light Kit
Product Information
The RGB LED Strip Light Kit is available in different modes with varying lengths – 5M/16.4ft, 10M/32.8ft, 15M/50ft, 20M/65.6ft, 30M/100ft, and 40M/130ft. The product is manufactured by Shenzhen Tianyun Technology Co., Ltd. The kit requires a power supply of +24V.
The product is distributed by the following companies:
- C&E Connection E-Commerce(DE) GmbH located in Frankfurt am Main, Germany
- CET PRODUCT SERVICE LTD. located in the UK
If you face any issues with the product, you can contact the after-sales service email at [email protected]. The product comes with a 1-year warranty and can be replaced for free if any quality problems occur.
Product Usage Instructions
To use the RGB LED Strip Light Kit, follow the steps below:
- Unbox the product and check that all components are present.
- Connect the kit to a power supply of +24V.
- Fix the strip light to the desired surface using the adhesive backing or mounting clips provided
- Use the remote control to select the desired color and mode of lighting.
- If you face any issues while using the product, contact the after-sales service email at [email protected] for support.
Product specification
RGB LED Strip Light Kit
Mode: ST-RGB- 5M/16.4ft
- ST-RGB- 10M/32.8ft
- ST-RGB- 15M/50ft
- ST-RGB- 20M/65.6ft
- ST-RGB-30M/100ft
- ST-RGB-40M/130ft
Product parameters
- View angle: 120°
- Led strip light: 24V
- Power supply: AC100-240V
- Color: RGB
Using Tips.
- Please stick the strip light on the clean and flat surface, with no dust, no watermarks.
- Make sure that the IR receiver is not blocked. Please aim at the receiver. Otherwise, the control wil be insensitive or out of control.
- Please fix the wiring on the object with wire clip to avoid pulling off the strip interface.
- Please note that the arrow position of the controller should be aligned with the strip light mark”+24V” otherwise the light will not light up.
- This product is designed for indoor use, not suitable for outdoor use.
- Do not roll up the strip during using. Please spread out the strip light before connection.
Accessories
- Led Strip Light
- Controller
- Power Supply
- User Manual
- Receiver Box
- Retaining Buckles
- After-Sales Email: [email protected]. If you encounter any problems, please contact us to solve for you. (This product is tree to replace within 1 vear if any quality problems occur
Attention: Do not roll up the strip during using
Shenzhen Tianyun Technology Co., Ltd. Room 504, No. 1, Wanxiao Industrial Park, Youth East Road, Langxin Community, Shiyan Street, Baoan District, Shenzhen, Guangdong,China,518000
C &E Connection E-Commerce(DE) GmbH
- Address: Zum Linnegraben 20 65933, Frankfurt am Main, Germany
- Telefon: 0049 069/27246648
- E-Mail: [email protected]
CET PRODUCT SERVICE LTD
- Address: Beacon House Stokenchurch Business Park, Ibstone Rd,Stokenchurch High Wycombe HP14 3FE UK
- Tel: +447419325266
- E-mail : [email protected]