EKVIP 021657 String Light Instruction Manual
- June 4, 2024
- EKVIP
Table of Contents
EKVIP 021657 String Light
SAFETY INSTRUCTIONS
- Do not connect the product to a power point while the product is still in the pack.
- Intended for indoor and outdoor use.
- Check that no light sources are damaged.
- Do not connect two or more string lights together electrically.
- No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or pointed objects during assembly.
- Do not subject the power cord or wires to mechanical stress. Do not hang objects on the string light.
- This is not a toy. Be careful if using the product near children.
- Disconnect the transformer from the power point when the product is not in use.
- This product must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
- The product is not intended to be used as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING!
The product must only be used when all the seals are correctly fitted.
SYMBOLS
- Read the instructions.
- Safety class II.
- Approved in accordance with the relevant directives.
- Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
- Rated input voltage: 230 V ~ 50 Hz
- Rated output voltage: 4.5 VDC
- Output: 2.7 W
- No. of LEDs: 60
- Safety class: II
- Protection rating: IP44
USE
- Remove the product from the packaging.
- Hang up the product in the required place.
- Insert the plug into the mains power supply.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>