SunWamntin HEXgreen LED Hookah with Hookah Bowl Coal Holder Instruction Manual

SunWamntin HEXgreen LED Hookah with Hookah Bowl Coal Holder

Product Information

Specifications

• Hookah Charcoal Holder: Holds 3-4 pieces of burning charcoal
• Silicone Hookah Bowl: Use a certain amount of flavor
• Head Adapter: Connects the bowl to the stem
• Hookah Tray: Catches ash from burning charcoal
• Up Stem: Connects the bowl to the base
• Down Pipe: Allows smoke to flow from the bowl to the base
• Hookah Base: Holds water for filtration
• Leather Hookah Hose: Used for smoking by mouth
• Coal Tongs: Used to hold charcoal and flavor
• LED Remote: Controls LED light color and modes

Frequently Asked Questions

• Q: How do I clean the Hookah?
  • A: Disassemble all parts and clean them with warm water and mild soap. Rinse thoroughly and let them air dry before reassembling.
• Q: How often should I change the charcoal?
  • A: Replace the charcoal when it stops producing smoke or loses heat. This typically occurs every 45-60 minutes.

Product Usage Instructions

Hookah Setup

1. Place the Hookah Base on a stable surface.
2. Connect the Up Stem to the Hookah Base.
3. Attach the Head Adapter to the Up Stem.
4. Place the Silicone Hookah Bowl on the Head Adapter.
5. Add a certain amount of flavor to the Silicone Hookah Bowl.

Preparing Charcoal

1. Use the Hookah Charcoal Holder to hold 3-4 pieces of burning charcoal.
2. Avoid touching the charcoal with your hands; always use the Coal Tongs.

Smoking Procedure

1. Connect the Leather Hookah Hose to the Hose Connection.
2. Ensure all connections are airtight using the Hose Gasket and Seal Rings.
3. Inhale through the Leather Hookah Hose while lighting the charcoal.

Overview Descriptions

• 1. Hookah Charcoal Holder: 3~4 pieces of burning charcoal can be used.
• 2. Silicone Hookah Bowl: Put in a certain amount of flavor to use.
• 6. Hose Gasket: Prevent air from entering and fix the pipe.
• 9. Glass Bead: Prevent air from entering, but when one person blows the smoke, remove the glass bead at the end of the smoke blowing.
• 14. LED Hole: Used to place LED lights.
• 15. LED Light: Three 3A batteries are needed to use it, which should be placed under the lamp position of the pot body.
• 18. Leather Hookah Hose: The handle part is used for smoking by mouth.
• 19. Coal Tongs: Clips are used to hold charcoal and flavor.
• 20. LED Remote: The remote controller controls LED light color and color change mode, and 12 colors are adjustable.

Using Instructions

NOTING

• Never touch the coal & holder by hand when they’re burning.

• Use tongs please.

• Never burn the holder on the coal starter & fire.

• All hookah kettles, the water level at least exceeds the silencer.

• You can poke holes in the tinfoil with a needle under the tongs.

• The complimentary gasket is used for increased friction and better sealing.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>