Chillafish CPCH02 10 inch Charlie Family Balance Bike User Manual
- June 17, 2024
- chillafish
Table of Contents
Chillafish CPCH02 10 inch Charlie Family Balance Bike
YAY!
Thanks for choosing CHILLAFISH and trusting your little one to discover the
world on one of our bikes. The honor is ours. Driving a CHILLAFISH bike might
be much more fun with a real, personalized CHILLAFISH driver’s license, don’t
you think? If you want to receive a personalized driver’s license for your
kid, with his/ her picture on it, just scan this QR- -code or go to
www.chillafish.com/driverlicense
and register your little rider.
Specifications
| Product Code | CG1022 |
|---|
Assembly Steps
- Attach the front wheel to the fork.
- Secure the handlebar to the fork using the tool provided. Ensure the cables are not twisted.
- Slide the seat post into the frame and adjust to the desired height. Tighten the clamp to secure it in place.
- Attach the pedals to the crank arms, making sure to distinguish between the left and right pedals. Tighten with the provided wrench.
Warnings and Safety Information
- Adult assembly is required. Keep children away during assembly.
- This product is not suitable for children under 36 months due to small parts.
- Before use, ensure all parts are securely assembled and the product is stable.
- Regularly check the product for loose screws, worn parts, torn material, or stitching. Replace parts as needed.
- Do not use if any part is broken, torn, or missing.
- Wear protective equipment such as a helmet, knee pads, and elbow pads.
- Do not use near steps, sloped driveways, in the road, or near water.
FAQ
What tools are required for assembly?
The necessary tools are provided with the product. How do I know which
pedal is for the left or right side?
The pedals are usually marked with an ‘L’ for left and ‘R’ for right. Can
I adjust the seat height after assembly?
Yes, the seat post can be adjusted and secured with the clamp. What
should I do if a part is missing or defective?
Contact the manufacturer for replacement parts. Is protective gear
included with the Charlie Glow?
No, protective gear must be purchased separately.
Manufacturer Information
- info@chillafish.com
- www.chillafish.com
- Chillafish designs and manufactures fun and innovative toys and recreational products for kids.
INSTALLATION INSTRUCTION
WARNING
To avoid serious injury
- Assembly and adjustment should be done by an adult.
- Read and understand the manual before use and keep it in a safe place for future reference.
- Continuous adult supervision is required.
- Wear protective equipment at all times when riding, this includes an approved safety helmet, closed shoes, and adequate protective clothing.
- Not to be used in traffic, near motor vehicles, streets, steps, sloped driveways, hills, alleys, swimming pools or other bodies of water.
- The total permissible load is a maximum 35 kg (77 lbs).
- Before riding, always check that all bolts and screws are well-fixed. Especially check if the seat fixing screw and handlebar are well tightened.
- This toy needs proper riding skills, therefore shall be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
- In an unassembled state, it contains potentially hazardous sharp edges or points, or small parts so please keep out of children’s reach.
- Never ride in low visibility conditions or at night.
- Ride on smooth, paved surfaces only and avoid excessive speed or going downhill, avoid debris, and avoid wet surfaces.
- Recommended age range: 18 – 48 months.
- Not suitable for children over 4 years of age due to the nature of construction.
- Incorrect assembly could result in potential hazards.
The Chillafish Company n.v. Straatsburgdok Noordkaai 21 b19 2030 Antwerpen, Belgium www.chillafish.com man _CPCH02_1.2_MULTILANG
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>