TECH CR-01 Motion Sensor Instruction Manual

: June 17, 2024
: TECH

Table of Contents

TECH CR-01 Motion Sensor
Instruction
How to register the device in the sinum system
Technical data
EU Declaration of conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TECH CR-01 Motion Sensor

Specifications

Power supply: 1x CR123A battery
Operation temperature
Measurement error
Humidity Measurement range
Operation frequency: 868 MHz
Max. transmission power: 25 mW

Product Usage Instructions

How to Register the Device in the Sinum System

Enter the address of the Sinum central device in the browser and log in to the device.
In the main panel, click on Settings > Devices > Wireless devices > +
Briefly press the registration button 1 on the device.
After completing the registration process, a confirmation message will appear on the screen.
Optionally, you can name the device and assign it to a specific room.

Notes
The product should not be disposed of in household waste containers. Please transfer used equipment to a designated collection point for recycling of electric and electronic components.

EU Declaration of Conformity
The motion sensor CR-01 is compliant with Directive 2014/53/EU.

FAQ:

Where can I find the full text of the EU declaration of conformity and user manual?
You can access the full text by scanning the QR code or visiting www.tech- controllers.com/manuals.
How can I contact customer service for technical support?
You can reach out to customer service through the provided contact details based on your location.

Instruction

The CR-01 motion sensor is a wireless and multifunctional device which detects movement in a room. The design of the device allows it to be put in any place or mounted on a wall. The movable head makes it possible to adjust its direction.
The CR-01 sensor communicates with the Sinum central device wirelessly and it allows you to increase security, e.g. by switching on the light, alarm or other pre-programmed scenes.
Built-in sensors: motion sensor, temperature sensor, humidity sensor, light sensor.

How to register the device in the sinum system

Enter the address of the Sinum central device in the browser and log in to the device. In the main panel, click the Settings > Devices > Wireless devices > + Then briefly press the registration button 1 on the device. After a properly completed registration process, an appropriate message will appear on the screen. Additionally, the user can name the device and assign it to a specific room.

Technical data

Notes

TECH Controllers is not responsible for any damages resulting from improper use of the system. The range depends on the conditions in which the device is used and the structure and materials used in the object construction. The manufacturer reserves the right to improve devices, update software and related documentation. The graphics are provided for illustration purposes only and may differ slightly from the actual look. The diagrams serve as examples. All changes are updated on an ongoing basis on the manufacturer’s website.
Before using the device for the first time, read the following regulations carefully. Not obeying these instructions may lead to personal injuries or controller damage. The device should be installed by a qualified person. It is not intended to be operated by children. It is a live electrical device. Make sure the device is disconnected from the mains before performing any activities involving the power supply (plugging cables, installing the device etc.). The device is not water resistant.

The product may not be disposed of to household waste containers. The user is obliged to transfer their used equipment to a collection point where all electric and electronic components will be recycled.

EU Declaration of conformity

Tech Sterowniki II Sp. z o.o. , ul. Biała Droga 34, Wieprz (34-122)
Hereby, we declare under our sole responsibility that the motion sensor CR-01 is compliant with Directive 2014/53/EU.

Wieprz, 01.06.202
Paweł Jura Janusz Master
Prezesi firmy

The full text of the EU declaration of conformity and the user manual are available after scanning the QR code or at www.tech- controllers.com/manuals

Service
tel: +48 33 875 93 80 www.tech-controllers.com
support.sinum@techsterowniki.pl

www.techsterowniki.pl/manuals

Wyprodukowano w Polsce
www.tech-controllers.com/manuals
Made in Poland