ONBALANCE TUFF WEIGH Digital Mini Scale User Guide

June 17, 2024
ONBALANCE

ONBALANCE TUFF WEIGH Digital Mini Scale

Thanks for purchasing the TUFF-WEIGH™ Digital Mini Scale! This User Guide is designed to get you up and running quickly with your scale. Scales are precision instruments and require proper care and skill to get the best results.
If you have questions or need support, visit us at http://www.obscales.com/support or scan the QR Code on the back of this manual using your smartphone.

What’s In The Box

ONBALANCE-TUFF-WEIGH-Digital-Mini-Scale-fig-1

Key Descriptions

  • ON/OFF – Turns the scale ON or OFF.
  • MODE – Changes the weighing unit.
  • TARE – Zeroes the scale. Also subtracts the weight of an empty container (see Tare Function).

Weighing Your First Item

  1. Press the ON/OFF key to turn the scale on.
  2. Place the item on the centre of the weighing platform.
  3. Take your reading from the display. You can press the MODE key to convert between weighing units.
  4. The scale’s auto-off function will turn the scale off after 3 minutes of inactivity or you can press the ON/OFF key to turn the scale off.

Unhinging The Cover /Tray

  1. Open the cover so it lays flat.
  2. Slide the cover to the left.

Things To Avoid

ONBALANCE-TUFF-WEIGH-Digital-Mini-Scale-fig-5

Tare Function

The Tare function allows you to subtract the weight of a container so that the display only shows the weight of the contents.

ONBALANCE-TUFF-WEIGH-Digital-Mini-Scale-fig-6

NOTE: The weight of the container will subtract from the available capacity and will leave a negative value on the display once the weight is removed. Press TARE again to return the display to zero.

Auto-Off

By default, the scale will auto-off after 180 seconds of inactivity. To change or disable the auto-off timer:

  1. Turn the scale on and wait for the display to zero.
  2. Press and hold the TARE key until the display shows the current auto-off setting (eg180), then release.
  3. Press the MODE key to change the auto-off setting between 180 sec, 120 sec, 60 sec, or 0 sec (auto-off disabled).
  4. Press ON/OFF to turn the scale off when finished.

Accuracy

Your scale comes calibrated from the factory and most users won’t need to calibrate their scale for a long time. You should check your scale’s accuracy periodically using calibration weights and perform calibration if necessary. NOTE: Only use trusted calibration weights.

Calibration

Calibration is permanent and should only be £.l.) performed using accurate calibration weights that match the requirements for your scale. Do not use coins or other household items to calibrate.

  1. Prepare the required weight for your scale (see chart on back).
  2. Find a flat and level surface to perform calibration and let the scale adjust to room temperature.
  3. Press ON/OFF to turn the scale on and wait for the scale to stabilise.
  4. Press and hold the MODE key until the display shows ‘CAL’.
  5. Make sure nothing is on the platform then press MODE to confirm the zero point.
  6. The display will then flash the required calibration weight.
  7. Place the required calibration weight on the centre of the platform.
  8. The display will show ‘PASS’ then return to normal weighing mode. You may now turn the scale off or continue weighing.

Specifications

ONBALANCE-TUFF-WEIGH-Digital-Mini-Scale-fig-9

For more information, including weighing tips and support, scan this code with your smartphone

Or visit us online at
www.obscales.com/support/

ONBALANCE-TUFF-WEIGH-Digital-Mini-Scale-fig-8

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals