ONBALANCE MX Series Digital Miniscale User Guide
- June 17, 2024
- ONBALANCE
Table of Contents
ONBALANCE MX Series Digital Meniscal User Guide
Thanks for purchasing the MX Series Digital Mini Scale! This User Guide is designed to get you up and running quickly with your scale. Scales are precision instruments and require proper care and skill to get the best results. If you have questions or need support, visit us at http:// www.obscales.com/support or scan the QR Code on the back of this manual using your smartphone.
What’s In The Box
-
User Guide
-
TWO AAA Batteries
-
MX Digital Mini Scale with Cover/Tray
Key Descriptions
M: MODE- Changes the weighing unit. Hold to enter calibration mode (see Calibration).
POWER/TARE- Turns the scale ON. Hold to turn the scale OFF. Tap to zero the scale during normal weighing. Also subtracts the weight of an empty container (see Tare Function).
Weighing Your First Item
- Press the ****key to turn the scale on.
- Place the item on the center of the weighing platform.
- Take your reading from the display. You can press the M key to convert between weighing units.
- The scale’s auto-off function will turn the scale off after 3 minutes of inactivity or you can press the ****key to turn the scale off.
Things To Avoid
-
Unlevel Surfaces
-
Radio Frequency Interference
-
High Humidity
-
Air Currents
-
Vibration
-
Extreme Temps
Tare Function
The Tare function allows you to subtract the weight of a container so that the display only shows the weight of the contents.
Place an empty tray or container on the platform.
Tap the key to subtract the container’s weight.
Add items to the container to see their weight on the display.
NOTE: The weight of the container will subtract from the available capacity and will leave a negative value on the display once the weight is removed. Press TARE again to return the display to zero
Accuracy
Your scale comes calibrated from the factory and most users won’t need to calibrate their scale for a long time. You should check your scale’s accuracy periodically using calibration weights and perform calibration if necessary.
NOTE: Only use trusted calibration weights. Household items such as bottles and cans with weights printed on the side are not suitable for checking accuracy as these values are approximate and don’t include the container weight (Net Weight.
Calibration
Calibration adjustment is permanent and should only be performed using accurate calibration weights that match the requirements for your scale (see the chart on back). Do not use coins or other household items to calibrate.
- Prepare the required weight for your scale. (see chart on back)
- Find a flat and level surface to perform calibration and let the scale adjust to room temperature.
- Press to turn the scale on and wait for the scale to stabilise.
- Press and hold the M key until the display shows
- ‘CAL’. Make sure nothing is on the platform then press M to confirm the zero point.
- The display will then flash the required calibration weight.
- Place the required calibration weight on the centre of the platform.
- The display will show ‘PASS’ then return to normal weighing mode. You may now turn the scale off or continue weighing.
Specifications
Max Capacity
MX-100
100.00 g / 3.527 oz /
3.215 ozt/64.30 dwt /
500.00 ct/1543.2 gn
MX-600
600.0 g/21.16oz/
19.29 ozt/385.8 dwt /
3000.0 ct/9258 gn
Readability
0.01 g / 0.001 oz/
0.001 ozt/0.01 dwt/
0.05 ct / 0.2 gn
0.1 g/0.01 oz/
0.01 ozt/0.1 dwt/
0.5 ct/2 gn
Weighing Units
g, oz, ozt, dwt, ct, gn
Dimensions
Overall: 94 mm x 61 mm x 20 mm
Platform: 55mm x 50mm
Display: 25 mm x 13 mm
Calibration Weight
100g (Sold Separately)
500g (Sold Separately)
Power
2 x AAA Batteries (Included)
Warranty
10 Year Limited Warranty
For more information, including weighing tips and support, scan this code with
your smartphone
Or visit us online at
www.obscales.com/support/