ONBALANCE SBM Series Digital Scale User Guide

October 30, 2023
ONBALANCE

ONBALANCE SBM Series Digital Scale User Guide

ONBALANCE SBM Series Digital Scale.jpg

Thanks for purchasing the SBM-100 Collapsible Bowl Scale! This User Guide is designed to get you up and running quickly with your scale. Scales are precision instruments and require proper care and skill to get the best results. If you have questions or need support, visit us at http://www.obscales.com/support or scan the QR Code on the back of this manual using your smartphone.

What’s In The Box

FIG 1 What's In The Box.JPG

Key Descriptions

FIG 2 Key Descriptions.JPG

Weighing Your First Item

FIG 3 Weighing Your First Item.JPG

Things To Avoid

FIG 4 Things To Avoid.JPG

Tare Function

The Tare function allows you to subtract the weight of a container so that the display only shows the weight of the contents.

FIG 5 Tare Function.JPG

NOTE: The weight of the container will subtract from the available capacity and will leave a negative value on the display once the weight is removed. Press TARE again to return the display to zero.

Accuracy

Your scale comes calibrated from the factory and most users won’t need to calibrate their scale for a long time. You should check your scale’s accuracy periodically using calibration weights and perform calibration if necessary.

**NOTE:** Only use trusted calibration weights. Household items such as bottles and cans with weights printed on the side are not suitable for checking accuracy as these values are approximate and don’t include the container weight (Net Weight).

Calibration

Calibration adjustment is permanent and should only be performed using accurate calibration weights that match the requirements for your scale (see the chart on back). Do not use coins or other household items to calibrate.

  1. Prepare the required weight for your scale. (see chart on back)
  2. Find a flat and level surface to perform calibration and let the scale adjust to room temperature.
  3. Press to turn the scale on and wait for the scale to stabilise.
  4. Press and hold the M key until the display shows ‘CAL’.
  5. Make sure nothing is on the platform then press M to confirm the zero point.
  6. The display will then flash the required calibration weight.
  7. Place the required calibration weight on the centre of the platform.
  8. The display will show ‘PASS’ then return to normal weighing mode. You may now turn the scale off or continue weighing.

Specifications

FIG 7 Specifications.JPG

For more information, including weighing tips and support, scan this code with your smartphone

Or visit us online at obscales.com/support/

FIG 8.JPG

FIG 9.JPG

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals