ONBALANCE Table Top Digital Mini Scale User Guide
- June 17, 2024
- ONBALANCE
Table of Contents
ONBALANCE Table Top Digital Mini Scale
Thanks for purchasing the MINI TABLE-TOP Digital Mini Scale! This User Guide is designed to get you up and running quickly with your scale. Scales are precision instruments and require proper care and skill to get the best results. If you have questions or need support, visit us at http://www.obscales.com/support or scan the QR Code on the back of this manual using your smartphone.
What’s In The Box
Key Descriptions
- ON/OFF – Turns the scale
- ON or OFF.
- MODE – Changes the weighing unit.
- TARE – Zeroes the scale. Also subtracts the weight of an empty container (see Tare Function)
- CAL – Enters calibration mode. See Calibration.
Weighing Your First Item
- Press the ON/OFF key to turn the scale on.
- Place the item on the centre of the weighing platform.
- Wait for the stability indicator to display, then take your reading from the display. You can press the MODE key to convert between weighing units.
- The scale’s auto-off function will turn the scale off after 3 minutes of inactivity or you can press the ON/OFF key to turn the scale off.
Disabling The Auto-Off Feature
This scale has an auto-off feature that will power off the scale after 3 min
of inactivity. To disable the auto-off:
- Press and hold the MODE key until the display shows “AUOFF”.
- The auto-off is now disabled and the scale will remain on until manually powered off. The auto-off will be restored the next time you turn the scale on.
Things To Avoid
Tare Function
The Tare function allows you to subtract the weight of a container so that the
display only shows the weight of the contents.
Place an empty tray or container on the platform and wait for the stability
indicator.
Press the TARE key to subtract the container’s weight.
Add items to the container to see their weight on the display.
NOTE: The weight of the container will subtract from the available capacity and will leave a negative value on the display once the weight is removed. Press TARE again to return the display to zero.
Accuracy
Your scale comes calibrated from the factory and most users won’t need to
calibrate their scale for a long time.
You should check your scale’s accuracy periodically using the included
calibration weight and perform calibration if necessary.
NOTE: Only use trusted calibration weights.
Household items such as bottles and cans with weights printed on the side are
not suitable for checking accuracy as these values are approximate and don’t
include the container weight (Net Weight).
Calibration
Calibration adjustment is permanent and should only be performed using
accurate calibration weights that match the requirements for your scale (see
the chart on back). Do not use coins or other household items to calibrate.
- Prepare the calibration weight.
- Find a flat and level surface to perform calibration and let the scale adjust to room temperature.
- Press ON/OFF to turn the scale on and wait for the scale to stabilise.
- Press the CAL key. The display will show ‘CAL’.
- Make sure nothing is on the platform then press CAL to confirm the zero point.
- The display will then flash the required calibration weight.
- Place the required calibration weight on the centre of the platform.
- The display will show ‘PASS’ then return to normal weighing mode. You may now turn the scale off or continue weighing.
Specifications
For more information, including weighing tips and support, scan this code with your smartphone Or visit us online at www.obscales.com/support/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>