PANORAMA ANTENNAS BM-IN2809 UHF Bracket Mount Antenna Instructions

Table of Contents

PANORAMA-ANTENNAS-BM-IN2809-UHF-Bracket-Mount-Antenna-
PRODUCT

Specifications
- Part No.: BM-IN2809
- Electrical Data:
- Frequency range (MHz): 450-470
- Operational band: 450MHz
- Peak gain: 2dBi
- Typical VSWR @ 453MHz: Not specified
- Polarisation: Not specified
- Pattern Impedance: Not specified
- Max input power (W): Not specified
- Mechanical Data:
- Dimensions (mm):
- Total length: Not specified
- Length of whip: Not specified
- Off-set from wall (mm): Not specified
- Colour: Not specified
- Cable Data:
- Type: Not specified
- Length (m): 3m
- Diameter (mm): Not specified
- Termination: SMA (m) connector

Installation
- The BM-IN2809 UHF Bracket Mount Antenna can be installed either by wall mounting or pole mounting.
Wall Mounting:
- Use screw fixings to securely mount the bracket onto the wall.
- Connect the low-loss cable to the antenna.
- Adjust the antenna for optimal positioning.
Pole Mounting:
- Use the supplied worm drive clip to attach the antenna to a pole securely.
- Connect the low-loss cable to the antenna.
- Orient the antenna for best signal reception.
Maintenance
- To ensure optimal performance, regularly inspect the antenna for any signs of damage or wear. Clean the antenna and connections as needed to prevent signal degradation.
Frequently Asked Questions (FAQ)
- Q: Can the BM-IN2809 antenna be used for indoor applications?
- A: The BM-IN2809 antenna is designed for outdoor use due to its durable construction and mounting options for outdoor installations.
- Q: What is the maximum input power supported by the BM-IN2809 antenna?
- A: The maximum input power for this antenna is not specified in the provided documentation. Please refer to the manufacturer for specific details on power handling capabilities.

Tuned for 450-470MHz band
Improves range
Wall mount or mast mount options
The bracket mount BM-IN2809 antenna is an easy-to-install solution.
Consisting of a robust end-fed half-wave antenna with a stainless steel rod mounted on a durable UV stable ABS bracket the BM-IN2809 meets the challenges of 450MHz metering applications.
The antenna can be wall mounted via screw fixings or pole mounted with a supplied worm drive clip.
It is supplied with 3m (9.8’) of low-loss cable and a fitted SMA (m) connector.

$PANORAMA-ANTENNAS-BM-IN2809-UHF-Bracket-Mount-Antenna-FIG-1 $1$$

$PANORAMA-ANTENNAS-BM-IN2809-UHF-Bracket-Mount-Antenna-FIG-1 $4$$

Peak gain and VSWR measured in free space with 0.75m (30”) of CS23 cable

$PANORAMA-ANTENNAS-BM-IN2809-UHF-Bracket-Mount-Antenna-FIG-1 $2$$

VSWR measured in free space with 0.75m (30”) of CS23 cable

$PANORAMA-ANTENNAS-BM-IN2809-UHF-Bracket-Mount-Antenna-FIG-1 $3$$

Waiver:

The data given above is indicative of the performance of the product/s under particular conditions and does not imply a guarantee of performance.
These specifications are subject to change without notice.