V-TAC VT-061 LED Tubes Light Instruction Manual

: June 17, 2024
: V TAC

Table of Contents

TECHNICAL DATA
INTRODUCTION & WARRANTY
PACKAGE CONTENT
NEW FITTING INSTALLATION
INSTALLATION & REPLACEMENT OF FLUORESCENT LAM (SINGLE MAGNETIC BALLAST
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

V-TAC VT-061 LED Tubes Light Instruction Manual

TECHNICAL DATA

MODEL	VT-061	VT-121	VT-151	VT-062	VT-122	VT-152
SKU	21650,21651,21652	21653,21654,21655	21656,21657,21658
21686,21687,21798	21672,21673,21688	21674,21675,21799
WATTS	9W	18W	20W	7.5W	16.5W	24W
LUMENS	850LM@Sphere360°	1850LM@Sphere360°	2100LM@Sphere360°
850LM@Sphere360°	1850LM@Sphere360°	3000LM@Sphere360°
CRI	>80	>80	>80	>80	>80	>80
DF	>0.5	>0.7	>0.7	>0.5	>0.7	>0.7
BEAMANGLE	160°	160°	160°	160°	160°	160°
BODY TYPE	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic
IP RATING	IP20	IP20	IP20	IP20	IP20	IP20
HOLDER	G13	G13	G13	G13	G13	G13
LONG LIFE	25,000 Hours	25,000 Hours	25,000 Hours	25,000 Hours
25,000 Hours	25,000 Hours
ON/OFF CYCLES	>15,000	>15,000	>15,000	>15,000	>15,000	>15,000
DIMENSION	600x28mm	1200x28mm	1500x28mm	600x28mm	1200x28mm

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only. The LED tube can be used in hotels, offices, factories, conference rooms, meeting rooms, commercial complexes, residential buildings, schools, colleges, universities, hospitals, etc.

PACKAGE CONTENT

LED Tube (1PC)
Instruction Manual (1PC)
Dummy Starter (1PC)

This marking indicates that this product should not be disposed of with other household wastes.

Caution, risk of electric shock.

WARNING

Installation should only be done by a certified electrician
Operation environment temperature: -20°C to +45°C.
For Indoor use only
Do not use DC electricity.
Do not modify the fitting to be used with the LED Tube.
V-TAC LED Tubes are NOT designed to be used in emergency operations.
For Indoor use only.
Do NOT use with electronic ballasts. V-TAC LED tubes are not compatible with electronic ballast circuit. In order to use the electronic ballast fitting you must ensure to remove the electronic ballast from the fitting and rewire the circuit as per new fitting installation as shown below. Ensure the installation and wiring is
carried out by certified electrician.

NEW FITTING INSTALLATION

Installation should only be done by a certified electrician
Switch O£ the power.
Ensure the wiring diagram is followed as highlighted.
Insert V-TAC LED Tube.
Switch On the power to test the light.

INSTALLATION & REPLACEMENT OF FLUORESCENT LAM (SINGLE MAGNETIC BALLAST

CIRUIT)

Installation should only be done by a `certified electrician.
Please refer to the wiring diagram for replacing fluorescent tube on a single magnetic ballast circuit with V-TAC LED Tube.