friendie AIR PRO 4.0 Active Noise Cancelling Wireless Over Ear Headphones User Manual

friendie AIR PRO 4.0 Active Noise Cancelling Wireless Over Ear Headphones

Let’s be friends.
Visit https://www.friendie.com.au
Write a review on the AIR PRO 4.0 product page for your chance to win prizes and receive your own discount code!

Components

Charging

Charging your AIR PRO 4.0

1. Before charging, please ensure the ANC and Bluetooth are off.
2. Plug the USB cord into the USB port on the headphones.
3. Connect the USB cord to a USB port on a computer.
4. Red LED light on the headphones shows that charging is underway.
5. Once fully charged, the red LED light will turn off.

Power On/Off

Powering your AIR PRO 4.0 on
To turn on your Friendie AIR PRO 4.0, press and hold the multi-function button for 3 seconds until the LED light flashes blue and red.

Powering your AIR PRO 4.0 off
To turn off your Friendie AIR PRO 4.0, press and hold the multi-function button for 3 seconds. The red LED light will flash fast and then turn off. Turn ANC off by sliding the switch down. The green LED light will turn off.

Wireless Pairing

Pairing your AIR PRO 4.0

1. When turned on, your headphones will either automatically change to pairing mode, or connect to the last paired device.
2. Keep your headphones and mobile device within range.
3. On your mobile device, tum Bluetooth on.
4. Under your Bluetooth devices on your mobile device, select device “friendie AIR PRO 4.0”. If a password is, required enter 0000.
5. When paired, the LED light on the headphones will blink blue.

Active Noise Cancelling

About Active Noise Cancelling
Your Friendie AIR PRO 4.0 includes Active Noise Cancelling {ANC) technology. ANC works by using microphones to pick up low-frequency noise to neutralise it digitally. ANC will reduce continuous frequent external noise; please allow time for your headphones to decipher external noise that it should cancel. It will not cancel short noises, and will require some time from turning ANC on to start canceling.

Power your Active Noise Cancelling
Turn ANC on by sliding the switch up, a gree
LED light will appear.

To turn ANC off, slide the switch down, the green LED light will disappear.

Sizing Correctly

Correctly sizing your AIR PRO 4.0
Your headphones feature extendable headbands and rotating earcups lo ensure a comfortable and adjustable fit. Please extend the headband before placing on your head. The earcups fold inwards away from your body. Please be gentle- the earcups only rotate in the one direction.

Wireless Controls

Controlling your AIR PRO 4.0
Your headphones also have Bluetooth controls to change music and answer phone calls. Bluetooth needs to be on and connected.

Wired Connection

Connecting your AIR PRO 4.0
Your headphones also include a 3.5mm auxiliary line-in with an in-built microphone. Turn your Bluetooth off to utilize the AUX cable.

Troubleshooting

Headphones are not charging

1. Check USB charging cord is not damaged.
2. Check USB port from computer has power.
3. Check charging port is free of dirt.
4. Check USB charging port is not damaged.

Unable to hear music from headphones

1. Check your paired device bluetooth settings; are your headphones connected to your device?
   Your headphones will pair to the last device.

2. Is the indicator light blinking blue and red? If so, the headphones are not paired to a device. See pairing.

Volume is too low

1. Check your phone settings in case volume has been adjusted.

Music drop-outs

1. Check your device and headphones within a 10 meter visual range
2. Ensure you have no barriers disrupting connections
3. Ensure you have no interference from other 2.5Ghz devices, e.g cordless phones, WiFi.

Phone calls are not clear

1. Your headphones are not designed for phone calls, the phone is a secondary function. Due to the small microphone located inside the headphones, phone calls will always be clearer if you use your phone rather than headphones.
2. You can also choose to use the wired connection, which includes a microphone on the cord. This may enhance clarity.

Need Help? Please contact support@friendie.com.au

Safety Precautions

Listen Responsibly
Headphones are capable of delivering sounds at loud volumes and high pitched tones. Prolonged exposure to loud sounds can cause irreversible hearing damage. It is dangerous or even illegal in some areas to use your headphones in situations that require your full attention, such as driving a car.

Safety Precautions
This product is not intended for commercial use and has been tested for household use only. This product is not intended for use by small children, or persons with diminished capabilities. Please ensure that the use of this product is monitored by a guardian or parent. To reduce the risk of fire or electric shock, never use your headphones near water or in areas where it can come into contact with water. Never handle the headphones if they have been dropped into water or any other liquid. If the product comes into contact with water while switched off, this poses a safety hazard. Always make sure your hands are dry before touching the plug or power connections.

• CAUTION: Do not remove the panel covers by unscrewing them. To reduce the risk of electric shock, do not remove the cover. No user serviceable parts inside. Refer servicing to a qualified service personnel.
• DO NOT use any accessories, plugs or power cables not recommended by this document, or of a lesser Amperage or Voltage.
• DO NOT operate the product with a damaged cord or plug, or after it has malfunctioned, it has been dropped or damaged in any way.
• WARNING: Always keep optional accessories, small parts and packaging out of the reach of babies and small children, as these items may pose a choking hazard.
• DO NOT overcharge your headphones; doing so may shorten the lifespan of the built-in batteries and could also cause your device to overheat.
• CAUTION: Do not disassemble the battery or dispose of it in a fire.
• CAUTION: Should your battery show signs of overheating, smoke or fumes being emitted during charging, remove the charging cable immediately.
• DO NOT use any harsh or abrasive cleaning chemicals or materials on your headphones; doing so may damage or scratch the surface finish.
• DO NOT expose your headphones to direct sunlight or high temperatures for extended periods of time. Do not store in temperatures over 60°C.
• DO NOT expose the battery to excessive heat such as sunshine, fire or the like. Store in a cool, dry place.

Specifications

Battery:

• Capacity: 400mAh Li-ion
• Charge lime: Less then 2 hours
• Music playback: Up to 24 hours
• Music Playback with ANG: Up to 15 hours
• Standby time:  Up to 150 hours

Audio:

• Sensitivity: 115dB +-3dB
• Impedance: 32 n
• Driver: 40mm
• Noise Cancelling: Active Noise Cancelling
• ANG Depth: 20-22 dB

Connections:
Wireless:

• Standard: BT5.0
• Distance range: Up to 10 meters (30 feet)
• Protocol: HFP/A2DP/AVRCP

Wired:

• Backup cable:  3.5mm AUX audio cable  Play/pause/next track/previous track/
• Multi-function controller: Media playback: Volume upNolume down
• Phone connection: Answer and receive calls
• Notifications: Voice and digital
• Headphones weight: 210 grams

www.friendie.com.au
i: @friendie_audio
f: friendieaudio

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. his device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>